On 10.01.2023 12:36, Paolo Abeni wrote:

Hi,

sorry for the late feedback, a couple of notes below...

Hello! Thanks for review! just fixed it in v7

Thanks, Arseniy

On Sun, 2023-01-08 at 20:43 +0000, Arseniy Krasnov wrote:

quoted

This adds utility to check vsock rx/tx performance.

Usage as sender:
./vsock_perf --sender <cid> --port <port> --bytes <bytes to send>
Usage as receiver:
./vsock_perf --port <port> --rcvlowat <SO_RCVLOWAT>

Signed-off-by: Arseniy Krasnov <redacted>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
---
 tools/testing/vsock/Makefile     |   3 +-
 tools/testing/vsock/README       |  34 +++
 tools/testing/vsock/vsock_perf.c | 441 +++++++++++++++++++++++++++++++
 3 files changed, 477 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/vsock/vsock_perf.c

diff --git a/tools/testing/vsock/Makefile b/tools/testing/vsock/Makefile
index f8293c6910c9..43a254f0e14d 100644
--- a/tools/testing/vsock/Makefile
+++ b/tools/testing/vsock/Makefile

@@ -1,8 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0-only
-all: test
+all: test vsock_perf
 test: vsock_test vsock_diag_test
 vsock_test: vsock_test.o timeout.o control.o util.o
 vsock_diag_test: vsock_diag_test.o timeout.o control.o util.o
+vsock_perf: vsock_perf.o
 
 CFLAGS += -g -O2 -Werror -Wall -I. -I../../include -I../../../usr/include -Wno-pointer-sign -fno-strict-overflow -fno-strict-aliasing -fno-common -MMD -U_FORTIFY_SOURCE -D_GNU_SOURCE
 .PHONY: all test clean

diff --git a/tools/testing/vsock/README b/tools/testing/vsock/README
index 4d5045e7d2c3..84ee217ba8ee 100644
--- a/tools/testing/vsock/README
+++ b/tools/testing/vsock/README

@@ -35,3 +35,37 @@ Invoke test binaries in both directions as follows:
                        --control-port=$GUEST_IP \
                        --control-port=1234 \
                        --peer-cid=3
+
+vsock_perf utility
+-------------------
+'vsock_perf' is a simple tool to measure vsock performance. It works in
+sender/receiver modes: sender connect to peer at the specified port and
+starts data transmission to the receiver. After data processing is done,
+it prints several metrics(see below).
+
+Usage:
+# run as sender
+# connect to CID 2, port 1234, send 1G of data, tx buf size is 1M
+./vsock_perf --sender 2 --port 1234 --bytes 1G --buf-size 1M
+
+Output:
+tx performance: A Gbits/s
+
+Output explanation:
+A is calculated as "number of bits to send" / "time in tx loop"
+
+# run as receiver
+# listen port 1234, rx buf size is 1M, socket buf size is 1G, SO_RCVLOWAT is 64K
+./vsock_perf --port 1234 --buf-size 1M --vsk-size 1G --rcvlowat 64K
+
+Output:
+rx performance: A Gbits/s
+total in 'read()': B sec
+POLLIN wakeups: C
+average in 'read()': D ns
+
+Output explanation:
+A is calculated as "number of received bits" / "time in rx loop".
+B is time, spent in 'read()' system call(excluding 'poll()')
+C is number of 'poll()' wake ups with POLLIN bit set.
+D is B / C, e.g. average amount of time, spent in single 'read()'.

diff --git a/tools/testing/vsock/vsock_perf.c b/tools/testing/vsock/vsock_perf.c
new file mode 100644
index 000000000000..ccd595462b40
--- /dev/null
+++ b/tools/testing/vsock/vsock_perf.c

@@ -0,0 +1,441 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vsock_perf - benchmark utility for vsock.
+ *
+ * Copyright (C) 2022 SberDevices.
+ *
+ * Author: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
+ */
+#include <getopt.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <string.h>
+#include <errno.h>
+#include <unistd.h>
+#include <time.h>
+#include <stdint.h>
+#include <poll.h>
+#include <sys/socket.h>
+#include <linux/vm_sockets.h>
+
+#define DEFAULT_BUF_SIZE_BYTES	(128 * 1024)
+#define DEFAULT_TO_SEND_BYTES	(64 * 1024)
+#define DEFAULT_VSOCK_BUF_BYTES (256 * 1024)
+#define DEFAULT_RCVLOWAT_BYTES	1
+#define DEFAULT_PORT		1234
+
+#define BYTES_PER_GB		(1024 * 1024 * 1024ULL)
+#define NSEC_PER_SEC		(1000000000ULL)
+
+static unsigned int port = DEFAULT_PORT;
+static unsigned long buf_size_bytes = DEFAULT_BUF_SIZE_BYTES;
+static unsigned long vsock_buf_bytes = DEFAULT_VSOCK_BUF_BYTES;
+
+static inline time_t current_nsec(void)

Minor nit: you should avoid 'static inline' functions in c files,
'static' would suffice and will allow the compiler to do a better job.

quoted

+{
+	struct timespec ts;
+
+	if (clock_gettime(CLOCK_REALTIME, &ts)) {
+		perror("clock_gettime");
+		exit(EXIT_FAILURE);
+	}
+
+	return (ts.tv_sec * NSEC_PER_SEC) + ts.tv_nsec;
+}
+
+/* From lib/cmdline.c. */
+static unsigned long memparse(const char *ptr)
+{
+	char *endptr;
+
+	unsigned long long ret = strtoull(ptr, &endptr, 0);
+
+	switch (*endptr) {
+	case 'E':
+	case 'e':
+		ret <<= 10;
+	case 'P':
+	case 'p':
+		ret <<= 10;
+	case 'T':
+	case 't':
+		ret <<= 10;
+	case 'G':
+	case 'g':
+		ret <<= 10;
+	case 'M':
+	case 'm':
+		ret <<= 10;
+	case 'K':
+	case 'k':
+		ret <<= 10;
+		endptr++;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static void vsock_increase_buf_size(int fd)
+{
+	if (setsockopt(fd, AF_VSOCK, SO_VM_SOCKETS_BUFFER_MAX_SIZE,
+		       &vsock_buf_bytes, sizeof(vsock_buf_bytes))) {
+		perror("setsockopt(SO_VM_SOCKETS_BUFFER_MAX_SIZE)");
+		exit(EXIT_FAILURE);
+	}
+
+	if (setsockopt(fd, AF_VSOCK, SO_VM_SOCKETS_BUFFER_SIZE,
+		       &vsock_buf_bytes, sizeof(vsock_buf_bytes))) {
+		perror("setsockopt(SO_VM_SOCKETS_BUFFER_SIZE)");
+		exit(EXIT_FAILURE);

You use the above pattern frequently, but you could replace both
libcall with a single error() call.

Thanks,

Paolo