Some boards(such as StarFive VisionFive v2) require more than one value
which defined by resets property, so the original definition can not
meet the requirements. In order to adapt to different requirements,
adjust the maxitems number definition.
Signed-off-by: Yanhong Wang <redacted>
---
.../devicetree/bindings/net/snps,dwmac.yaml | 36 ++++++++++++++-----
1 file changed, 28 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index e26c3e76ebb7..f7693e8c8d6d 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -132,14 +132,6 @@ properties:
- pclk
- ptp_ref
- resets:
- maxItems: 1
- description:
- MAC Reset signal.
-
- reset-names:
- const: stmmaceth
-
power-domains:
maxItems: 1
@@ -463,6 +455,34 @@ allOf:
Enables the TSO feature otherwise it will be managed by
MAC HW capability register.
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: starfive,jh7110-dwmac
+
+ then:
+ properties:
+ resets:
+ minItems: 2
+ maxItems: 2
+ reset-names:
+ items:
+ - const: stmmaceth
+ - const: ahb
+ required:
+ - resets
+ - reset-names
+ else:
+ properties:
+ resets:
+ maxItems: 1
+ description:
+ MAC Reset signal.
+
+ reset-names:
+ const: stmmaceth
+
additionalProperties: true
examples:--
2.17.1