Thread (31 messages) 31 messages, 6 authors, 2022-12-28

Re: [PATCH v2 2/9] dt-bindings: net: snps,dwmac: Update the maxitems number of resets and reset-names

From: Krzysztof Kozlowski <hidden>
Date: 2022-12-27 08:19:20
Also in: linux-devicetree, linux-riscv, lkml

On 27/12/2022 08:48, yanhong wang wrote:

On 2022/12/20 17:21, Krzysztof Kozlowski wrote:
quoted
On 20/12/2022 07:48, yanhong wang wrote:
quoted
quoted
quoted
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index e26c3e76ebb7..7870228b4cd3 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -133,12 +133,19 @@ properties:
         - ptp_ref
 
   resets:
-    maxItems: 1
-    description:
-      MAC Reset signal.
+    minItems: 1
+    maxItems: 3
+    additionalItems: true
+    items:
+      - description: MAC Reset signal
 
   reset-names:
-    const: stmmaceth
+    minItems: 1
+    maxItems: 3
+    additionalItems: true
+    contains:
+      enum:
+        - stmmaceth
No, this is highly unspecific and you know affect all the schemas using
snps,dwmac.yaml. Both lists must be specific - for your device and for
others.
I have tried to define the resets in "starfive,jh71x0-dwmac.yaml", but it can not over-write the maxItems limit in "snps,dwmac.yaml",therefore, it will report error "reset-names: ['stmmaceth', 'ahb'] is too long"  running "make dt_binding_check". Do you have any suggestions to deal with this situation?
The solution is not to affect all schemas with allowing anything as reset.

If you need more items for your case, you can change snps,dwmac.yaml and
add constraints in allOf:if:then: allowing it only for your compatible.
There are plenty of examples how this is done, e.g.:

https://elixir.bootlin.com/linux/v5.19-rc6/source/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml#L57
Thanks. Refer to the definition in the example and update the definition as follows:

snps,dwmac.yaml[Partial Content]:

properties:
  resets:
    maxItems: 1
    description:
      MAC Reset signal.

  reset-names:
    const: stmmaceth

allOf:
  - if:
      properties:
        compatible:
          contains:
            const: starfive,jh7110-dwmac

    then:
      properties:
        resets:
          minItems: 2
          maxItems: 2
        reset-names:
          items:
            - const: stmmaceth
            - const: ahb
      required:
        - resets
        - reset-names


starfive,jh7110-dwmac.yaml[Partial Content]:

properties:
  resets:
    items:
      - description: MAC Reset signal.
      - description: AHB Reset signal.

  reset-names:
    items:
      - const: stmmaceth
      - const: ahb

allOf:
  - $ref: snps,dwmac.yaml#

It will also report error "reset-names: ['stmmaceth', 'ahb'] is too long"  running "make dt_binding_check" with 'starfive,jh7110-dwmac.yaml'. Do you have any better suggestions to solve this problem?
Because it is not correct. The top-level properties must have the widest
constraints which in allOf:if:then:else you are further narrowing for
all of variants. ALL.

https://elixir.bootlin.com/linux/v5.19-rc6/source/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml#L57

Best regards,
Krzysztof
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help