[PATCH 1/3] net/ncsi: Simplify Kconfig/dts control flow
From: Peter Delevoryas <hidden>
Date: 2022-12-21 05:23:00
Also in:
lkml
Subsystem:
ncsi library, networking [general], the rest · Maintainers:
Samuel Mendoza-Jonas, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Background: 1. CONFIG_NCSI_OEM_CMD_KEEP_PHY If this is enabled, we send an extra OEM Intel command in the probe sequence immediately after discovering a channel (e.g. after "Clear Initial State"). 2. CONFIG_NCSI_OEM_CMD_GET_MAC If this is enabled, we send one of 3 OEM "Get MAC Address" commands from Broadcom, Mellanox (Nvidida), and Intel in the *configuration* sequence for a channel. 3. mellanox,multi-host (or mlx,multi-host) Introduced by this patch: https://lore.kernel.org/all/20200108234341.2590674-1-vijaykhemka@fb.com/ (local) Which was actually originally from cosmo.chou@quantatw.com: https://github.com/facebook/openbmc-linux/commit/9f132a10ec48db84613519258cd8a317fb9c8f1b Cosmo claimed that the Nvidia ConnectX-4 and ConnectX-6 NIC's don't respond to Get Version ID, et. al in the probe sequence unless you send the Set MC Affinity command first. Problem Statement: We've been using a combination of #ifdef code blocks and IS_ENABLED() conditions to conditionally send these OEM commands. It makes adding any new code around these commands hard to understand. Solution: In this patch, I just want to remove the conditionally compiled blocks of code, and always use IS_ENABLED(...) to do dynamic control flow. I don't think the small amount of code this adds to non-users of the OEM Kconfigs is a big deal. Signed-off-by: Peter Delevoryas <redacted> --- net/ncsi/ncsi-manage.c | 20 +++----------------- 1 file changed, 3 insertions(+), 17 deletions(-)
diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index 80713febfac6..f56795769893 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c@@ -689,8 +689,6 @@ static int set_one_vid(struct ncsi_dev_priv *ndp, struct ncsi_channel *nc, return 0; } -#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_KEEP_PHY) - static int ncsi_oem_keep_phy_intel(struct ncsi_cmd_arg *nca) { unsigned char data[NCSI_OEM_INTEL_CMD_KEEP_PHY_LEN];
@@ -716,10 +714,6 @@ static int ncsi_oem_keep_phy_intel(struct ncsi_cmd_arg *nca) return ret; } -#endif - -#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC) - /* NCSI OEM Command APIs */ static int ncsi_oem_gma_handler_bcm(struct ncsi_cmd_arg *nca) {
@@ -856,8 +850,6 @@ static int ncsi_gma_handler(struct ncsi_cmd_arg *nca, unsigned int mf_id) return nch->handler(nca); } -#endif /* CONFIG_NCSI_OEM_CMD_GET_MAC */ - /* Determine if a given channel from the channel_queue should be used for Tx */ static bool ncsi_channel_is_tx(struct ncsi_dev_priv *ndp, struct ncsi_channel *nc)
@@ -1039,20 +1031,18 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp) goto error; } - nd->state = ncsi_dev_state_config_oem_gma; + nd->state = IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC) + ? ncsi_dev_state_config_oem_gma + : ncsi_dev_state_config_clear_vids; break; case ncsi_dev_state_config_oem_gma: nd->state = ncsi_dev_state_config_clear_vids; - ret = -1; -#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC) nca.type = NCSI_PKT_CMD_OEM; nca.package = np->id; nca.channel = nc->id; ndp->pending_req_num = 1; ret = ncsi_gma_handler(&nca, nc->version.mf_id); -#endif /* CONFIG_NCSI_OEM_CMD_GET_MAC */ - if (ret < 0) schedule_work(&ndp->work);
@@ -1404,7 +1394,6 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp) schedule_work(&ndp->work); break; -#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC) case ncsi_dev_state_probe_mlx_gma: ndp->pending_req_num = 1;
@@ -1429,7 +1418,6 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp) nd->state = ncsi_dev_state_probe_cis; break; -#endif /* CONFIG_NCSI_OEM_CMD_GET_MAC */ case ncsi_dev_state_probe_cis: ndp->pending_req_num = NCSI_RESERVED_CHANNEL;
@@ -1447,7 +1435,6 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp) if (IS_ENABLED(CONFIG_NCSI_OEM_CMD_KEEP_PHY)) nd->state = ncsi_dev_state_probe_keep_phy; break; -#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_KEEP_PHY) case ncsi_dev_state_probe_keep_phy: ndp->pending_req_num = 1;
@@ -1460,7 +1447,6 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp) nd->state = ncsi_dev_state_probe_gvi; break; -#endif /* CONFIG_NCSI_OEM_CMD_KEEP_PHY */ case ncsi_dev_state_probe_gvi: case ncsi_dev_state_probe_gc: case ncsi_dev_state_probe_gls:
--
2.30.2