[PATCH v7 11/11] dt-bindings: net: dsa: qca8k: add LEDs definition example
From: Christian Marangi <ansuelsmth@gmail.com>
Date: 2022-12-15 00:02:37
Also in:
linux-devicetree, linux-doc, linux-leds, lkml
Subsystem:
networking drivers, networking [dsa], open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add LEDs definition example for qca8k using the offload trigger as the default trigger and add all the supported offload triggers by the switch. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- .../devicetree/bindings/net/dsa/qca8k.yaml | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index 978162df51f7..4090cf65c41c 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml@@ -65,6 +65,8 @@ properties: internal mdio access is used. With the legacy mapping the reg corresponding to the internal mdio is the switch reg with an offset of -1. + Each phy have at least 3 LEDs connected and can be declared + using the standard LEDs structure. patternProperties: "^(ethernet-)?ports$":
@@ -202,6 +204,7 @@ examples: }; - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> mdio { #address-cells = <1>;
@@ -284,6 +287,27 @@ examples: internal_phy_port1: ethernet-phy@0 { reg = <0>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + linux,default-trigger = "netdev"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + linux,default-trigger = "netdev"; + }; + }; }; internal_phy_port2: ethernet-phy@1 {
--
2.37.2