[PATCH v5 net-next 0/5] add PLCA RS support and onsemi NCN26000 · Piergiorgio Beruto <piergiorgio.beruto@gmail.com> · 2022-12-07
[PATCH v5 net-next 1/5] net/ethtool: add netlink interface for the PLCA RS · Piergiorgio Beruto <piergiorgio.beruto@gmail.com> · 2022-12-07
Re: [PATCH v5 net-next 1/5] net/ethtool: add netlink interface for the PLCA RS · Jakub Kicinski <kuba@kernel.org> · 2022-12-07
Re: [PATCH v5 net-next 1/5] net/ethtool: add netlink interface for the PLCA RS · Piergiorgio Beruto <piergiorgio.beruto@gmail.com> · 2022-12-07
Re: [PATCH v5 net-next 1/5] net/ethtool: add netlink interface for the PLCA RS · Andrew Lunn <andrew@lunn.ch> · 2022-12-07
Re: [PATCH v5 net-next 1/5] net/ethtool: add netlink interface for the PLCA RS · Piergiorgio Beruto <piergiorgio.beruto@gmail.com> · 2022-12-07
Re: [PATCH v5 net-next 1/5] net/ethtool: add netlink interface for the PLCA RS · Andrew Lunn <andrew@lunn.ch> · 2022-12-07
Re: [PATCH v5 net-next 1/5] net/ethtool: add netlink interface for the PLCA RS · Piergiorgio Beruto <piergiorgio.beruto@gmail.com> · 2022-12-07
Re: [PATCH v5 net-next 1/5] net/ethtool: add netlink interface for the PLCA RS · Andrew Lunn <andrew@lunn.ch> · 2022-12-07
Re: [PATCH v5 net-next 1/5] net/ethtool: add netlink interface for the PLCA RS · Piergiorgio Beruto <piergiorgio.beruto@gmail.com> · 2022-12-07
Re: [PATCH v5 net-next 1/5] net/ethtool: add netlink interface for the PLCA RS · Andrew Lunn <andrew@lunn.ch> · 2022-12-07
Re: [PATCH v5 net-next 1/5] net/ethtool: add netlink interface for the PLCA RS · Piergiorgio Beruto <piergiorgio.beruto@gmail.com> · 2022-12-08
Re: [PATCH v5 net-next 1/5] net/ethtool: add netlink interface for the PLCA RS · Andrew Lunn <andrew@lunn.ch> · 2022-12-11
Re: [PATCH v5 net-next 1/5] net/ethtool: add netlink interface for the PLCA RS · Piergiorgio Beruto <piergiorgio.beruto@gmail.com> · 2022-12-11
Re: [PATCH v5 net-next 1/5] net/ethtool: add netlink interface for the PLCA RS · Piergiorgio Beruto <piergiorgio.beruto@gmail.com> · 2022-12-07
Re: [PATCH v5 net-next 1/5] net/ethtool: add netlink interface for the PLCA RS · Jakub Kicinski <kuba@kernel.org> · 2022-12-08
Re: [PATCH v5 net-next 1/5] net/ethtool: add netlink interface for the PLCA RS · Jakub Kicinski <kuba@kernel.org> · 2022-12-08
Re: [PATCH v5 net-next 1/5] net/ethtool: add netlink interface for the PLCA RS · Piergiorgio Beruto <piergiorgio.beruto@gmail.com> · 2022-12-08
[PATCH v5 net-next 2/5] drivers/net/phy: add the link modes for the 10BASE-T1S Ethernet PHY · Piergiorgio Beruto <piergiorgio.beruto@gmail.com> · 2022-12-07
[PATCH v5 net-next 3/5] drivers/net/phy: add connection between ethtool and phylib for PLCA · Piergiorgio Beruto <piergiorgio.beruto@gmail.com> · 2022-12-07
[PATCH v5 net-next 4/5] drivers/net/phy: add helpers to get/set PLCA configuration · Piergiorgio Beruto <piergiorgio.beruto@gmail.com> · 2022-12-07
[PATCH v5 net-next 5/5] drivers/net/phy: add driver for the onsemi NCN26000 10BASE-T1S PHY · Piergiorgio Beruto <piergiorgio.beruto@gmail.com> · 2022-12-07
Re: [PATCH v5 net-next 0/5] add PLCA RS support and onsemi NCN26000 · Andrew Lunn <andrew@lunn.ch> · 2022-12-07

Re: [PATCH v5 net-next 1/5] net/ethtool: add netlink interface for the PLCA RS

From: Andrew Lunn <andrew@lunn.ch>
Date: 2022-12-07 17:48:19
Also in: lkml

quoted

And only return the actual version value, not the 0x0A.

About this, at the moment I am reporting the 0x0A to allow in the future
possible extensions of the standard. A single byte for the version may
be too limited given this technology is relatively fresh.
What you think of this?

What does the standards document say about this 0x0A?

     Andrew

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help