On 29/11/2022 08:27, Chukun Pan wrote:
From: David Wu <redacted>
The gmac of RK3568 supports RGMII/SGMII/QSGMII interface.
This patch adds the remaining SGMII/QSGMII support.
Do not use "This commit/patch".
https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95
Run-tested-on: Ariaboard Photonicat (GMAC0 SGMII)
Signed-off-by: David Wu <redacted>
[rebase, rewrite commit message]
Signed-off-by: Chukun Pan <redacted>
---
.../net/ethernet/stmicro/stmmac/dwmac-rk.c | 210 +++++++++++++++++-
1 file changed, 207 insertions(+), 3 deletions(-)
quoted hunk ↗ jump to hunk
-static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable)
+static int rk_gmac_phy_power_on(struct rk_priv_data *bsp_priv, bool enable)
{
struct regulator *ldo = bsp_priv->regulator;
int ret;@@ -1728,6 +1909,18 @@ static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev,
"rockchip,grf");
bsp_priv->php_grf = syscon_regmap_lookup_by_phandle(dev->of_node,
"rockchip,php-grf");
+ bsp_priv->xpcs = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "rockchip,xpcs");
+ if (!IS_ERR(bsp_priv->xpcs)) {
+ struct phy *comphy;
+
+ comphy = devm_of_phy_get(&pdev->dev, dev->of_node, NULL);
So instead of having PHY driver, you added a syscon and implemented PHY
driver here. No. Make a proper PHY driver.
Best regards,
Krzysztof