Thread (16 messages) flat view 16 messages, 3 authors, 2022-11-25
STALE1360d

Revision v6 of 3 in this series.

Revisions (3)
  1. v5 [diff vs current]
  2. v6 current
  3. v7 [diff vs current]

[PATCH net-next v6 5/6] net: dsa: microchip: enable MTU normalization for KSZ8795 and KSZ9477 compatible switches

From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: 2022-11-24 10:15:34
Also in: lkml
Subsystem: microchip ksz series ethernet switch driver, networking drivers, networking [dsa], the rest · Maintainers: Woojung Huh, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds

KSZ8795 and KSZ9477 compatible series of switches use global max frame
size configuration register. So, enable MTU normalization for this reason.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz8795.c | 2 ++
 drivers/net/dsa/microchip/ksz9477.c | 2 ++
 2 files changed, 4 insertions(+)
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index d01bfd609130..060e41b9b6ef 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -1357,6 +1357,8 @@ int ksz8_setup(struct dsa_switch *ds)
 	struct ksz_device *dev = ds->priv;
 	int i;
 
+	ds->mtu_enforcement_ingress = true;
+
 	ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_FLOW_CTRL, true);
 
 	/* Enable automatic fast aging when link changed detected. */
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index f6e7968ab105..47b54ecf2c6f 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -1134,6 +1134,8 @@ int ksz9477_setup(struct dsa_switch *ds)
 	struct ksz_device *dev = ds->priv;
 	int ret = 0;
 
+	ds->mtu_enforcement_ingress = true;
+
 	/* Required for port partitioning. */
 	ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
 		      true);
-- 
2.30.2
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help