@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/amlogic,meson6-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson6 eFuse
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson6-efuse
+      - amlogic,meson8-efuse
+      - amlogic,meson8b-efuse
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: core
+
+  secure-monitor:
+    description: phandle to the secure-monitor node
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    efuse: efuse@0 {
+        compatible = "amlogic,meson6-efuse";
+        reg = <0x0 0x2000>;
+        clocks = <&clk_efuse>;
+        clock-names = "core";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        sn: sn@14 {
+            reg = <0x14 0x10>;
+        };
+
+        eth_mac: mac@34 {
+            reg = <0x34 0x10>;
+        };
+
+        bid: bid@46 {
+            reg = <0x46 0x30>;
+        };
+    };

@@ -1,22 +0,0 @@
-Amlogic Meson6/Meson8/Meson8b efuse
-
-Required Properties:
-- compatible: depending on the SoC this should be one of:
-	- "amlogic,meson6-efuse"
-	- "amlogic,meson8-efuse"
-	- "amlogic,meson8b-efuse"
-- reg: base address and size of the efuse registers
-- clocks: a reference to the efuse core gate clock
-- clock-names: must be "core"
-
-All properties and sub-nodes as well as the consumer bindings
-defined in nvmem.txt in this directory are also supported.
-
-
-Example:
-	efuse: nvmem@0 {
-		compatible = "amlogic,meson8-efuse";
-		reg = <0x0 0x2000>;
-		clocks = <&clkc CLKID_EFUSE>;
-		clock-names = "core";
-	};