pon., 17 paź 2022 o 00:58 Rob Herring [off-list ref] napisał(a):

On Fri, 14 Oct 2022 23:32:52 +0200, Michał Grzelak wrote:

quoted

Convert the marvell,pp2 bindings from text to proper schema.

Move 'marvell,system-controller' and 'dma-coherent' properties from
port up to the controller node, to match what is actually done in DT.

Rename all subnodes to match "^(ethernet-)?port@[0-2]$" and deprecate
port-id in favour of 'reg'.

Signed-off-by: Michał Grzelak <redacted>
---
 .../devicetree/bindings/net/marvell,pp2.yaml  | 305 ++++++++++++++++++
 .../devicetree/bindings/net/marvell-pp2.txt   | 141 --------
 MAINTAINERS                                   |   2 +-
 3 files changed, 306 insertions(+), 142 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/marvell,pp2.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/marvell-pp2.txt

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/


ethernet@0: 'eth0', 'eth1', 'eth2' do not match any of the regexes: '^(ethernet-)?port@[0-2]$', 'pinctrl-[0-9]+'
        arch/arm64/boot/dts/marvell/armada-7040-db.dtb
        arch/arm64/boot/dts/marvell/armada-7040-mochabin.dtb
        arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb
        arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb
        arch/arm64/boot/dts/marvell/armada-8040-db.dtb
        arch/arm64/boot/dts/marvell/armada-8040-db.dtb
        arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb
        arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb
        arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dtb
        arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dtb
        arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dtb
        arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dtb
        arch/arm64/boot/dts/marvell/cn9130-crb-A.dtb
        arch/arm64/boot/dts/marvell/cn9130-crb-B.dtb
        arch/arm64/boot/dts/marvell/cn9130-db-B.dtb
        arch/arm64/boot/dts/marvell/cn9130-db.dtb
        arch/arm64/boot/dts/marvell/cn9131-db-B.dtb
        arch/arm64/boot/dts/marvell/cn9131-db-B.dtb
        arch/arm64/boot/dts/marvell/cn9131-db.dtb
        arch/arm64/boot/dts/marvell/cn9131-db.dtb
        arch/arm64/boot/dts/marvell/cn9132-db-B.dtb
        arch/arm64/boot/dts/marvell/cn9132-db-B.dtb
        arch/arm64/boot/dts/marvell/cn9132-db-B.dtb
        arch/arm64/boot/dts/marvell/cn9132-db.dtb
        arch/arm64/boot/dts/marvell/cn9132-db.dtb
        arch/arm64/boot/dts/marvell/cn9132-db.dtb

ethernet@f0000: 'eth0', 'eth1' do not match any of the regexes: '^(ethernet-)?port@[0-2]$', 'pinctrl-[0-9]+'
        arch/arm/boot/dts/armada-375-db.dtb

These warnings are addressed by the other 2 patches in this patchset:
[PATCH v5 2/3] arm64: dts: marvell: Update network description to match schema
[PATCH v5 3/3] ARM: dts: armada-375: Update network description to match schema

Can you please re-run check in your setup with the above applied?

Best regards,
Marcin