pon., 3 paź 2022 o 19:06 Michał Grzelak [off-list ref] napisał(a):

On 02/10/2022 10:23, Marcin Wojtas wrote:

quoted

niedz., 2 paź 2022 o 10:00 Krzysztof Kozlowski
[off-list ref] napisał(a):

quoted

On 01/10/2022 17:53, Michał Grzelak wrote:

quoted

Hi Krzysztof,

Thanks for your comments and time spent on reviewing my patch.
All of those improvements will be included in next version.
Also, I would like to know your opinion about one.

quoted

quoted

+
+  marvell,system-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the system controller.
+
+patternProperties:
+  '^eth[0-9a-f]*(@.*)?$':

The name should be "(ethernet-)?port", unless anything depends on
particular naming?

What do you think about pattern "^(ethernet-)?eth[0-9a-f]+(@.*)?$"?
It resembles pattern found in net/ethernet-phy.yaml like
properties:$nodename:pattern:"^ethernet-phy(@[a-f0-9]+)?$", while
still passing `dt_binding_check' and `dtbs_check'. It should also
comply with your comment.

Node names like ethernet-eth do not make much sense because they contain
redundant ethernet or eth. AFAIK, all other bindings like that call
these ethernet-ports (or sometimes shorter - ports). Unless this device
is different than all others?

IMO "^(ethernet-)?port@[0-9]+$" for the subnodes' names could be fine
(as long as we don't have to modify the existing .dtsi files) - there
is no dependency in the driver code on that.

Indeed, driver's code isn't dependent; however, there is a dependency
on 'eth[0-2]' name in all relevant .dts and .dtsi files, e.g.:

https://github.com/torvalds/linux/blob/master/arch/arm/boot/dts/armada-375.dtsi#L190
https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi#L72

Ports under 'ethernet' node are named eth[0-2], thus those and all .dts files
including the above would have to be modified to pass through `dtbs_check'.

Can you please double check?
The .dts files use labels, the node name they relate to should be irrelevant:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/marvell/cn9130-db.dtsi?h=v6.0#n122
(BTW, for A7k8k/CN913x example please use updated names, i.e.
s/cpm_/cp0_/ and s/cps_/cp1_/)
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/armada-375-db.dts?h=v6.0#n167

Best regards,
Marcin