[PATCH v2 net-next 03/10] dt-bindings: net: dsa: mediatek,mt7530: expand gpio-controller description
From: Arınç ÜNAL <hidden>
Date: 2022-09-15 06:57:14
Also in:
linux-arm-kernel, linux-devicetree, linux-mediatek, linux-mips, lkml
Subsystem:
networking drivers, networking [dsa], open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Expand the description of the gpio-controller property to include the controllable pins of the MT7530 switch. The gpio-controller property is only used for the MT7530 switch. Therefore, invalidate it for the MT7531 switch. Signed-off-by: Arınç ÜNAL <redacted> Acked-by: Rob Herring <robh@kernel.org> --- .../devicetree/bindings/net/dsa/mediatek,mt7530.yaml | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 2c73d13adf14..3ec4fffec780 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml@@ -104,7 +104,14 @@ properties: gpio-controller: type: boolean description: - If defined, MT7530's LED controller will run on GPIO mode. + If defined, LED controller of the MT7530 switch will run on GPIO mode. + + There are 15 controllable pins. + port 0 LED 0..2 as GPIO 0..2 + port 1 LED 0..2 as GPIO 3..5 + port 2 LED 0..2 as GPIO 6..8 + port 3 LED 0..2 as GPIO 9..11 + port 4 LED 0..2 as GPIO 12..14 "#interrupt-cells": const: 1
@@ -272,6 +279,7 @@ allOf: then: $ref: "#/$defs/mt7531-dsa-port" properties: + gpio-controller: false mediatek,mcm: false - if:
--
2.34.1