Re: [PATCH net-next 2/5] net: hns3: support ndo_select_queue()
From: huangguangbin (A) <hidden>
Date: 2022-09-07 00:57:29
Also in:
lkml
On 2022/9/6 21:15, Paolo Abeni wrote:
On Mon, 2022-09-05 at 16:15 +0800, Guangbin Huang wrote:quoted
To support tx packets to select queue according to its dscp field after setting dscp and tc map relationship, this patch implements ndo_select_queue() to set skb->priority according to the user's setting dscp and priority map relationship. Signed-off-by: Guangbin Huang <redacted> --- .../net/ethernet/hisilicon/hns3/hns3_enet.c | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+)diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 481a300819ad..82f83e3f8162 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c@@ -2963,6 +2963,51 @@ static int hns3_nic_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac) return h->ae_algo->ops->set_vf_mac(h, vf_id, mac); } +#define HNS3_INVALID_DSCP 0xff +#define HNS3_DSCP_SHIFT 2 + +static u8 hns3_get_skb_dscp(struct sk_buff *skb) +{ + __be16 protocol = skb->protocol; + u8 dscp = HNS3_INVALID_DSCP; + + if (protocol == htons(ETH_P_8021Q)) + protocol = vlan_get_protocol(skb); + + if (protocol == htons(ETH_P_IP)) + dscp = ipv4_get_dsfield(ip_hdr(skb)) >> HNS3_DSCP_SHIFT; + else if (protocol == htons(ETH_P_IPV6)) + dscp = ipv6_get_dsfield(ipv6_hdr(skb)) >> HNS3_DSCP_SHIFT; + + return dscp; +} + +static u16 hns3_nic_select_queue(struct net_device *netdev, + struct sk_buff *skb, + struct net_device *sb_dev) +{ + struct hnae3_handle *h = hns3_get_handle(netdev); + u8 dscp, priority; + int ret; + + if (h->kinfo.tc_map_mode != HNAE3_TC_MAP_MODE_DSCP || + !h->ae_algo->ops->get_dscp_prio) + goto out; + + dscp = hns3_get_skb_dscp(skb); + if (unlikely(dscp == HNS3_INVALID_DSCP)) + goto out; + + ret = h->ae_algo->ops->get_dscp_prio(h, dscp, NULL, &priority);This introduces an additional, unneeded indirect call in the fast path, you could consider replacing the above with a direct call to hclge_get_dscp_prio() - again taking care of the CONFIG_HNS3_DCB dependency. Cheers, Paolo .
Ok.