[PATCH v2 devicetree 2/3] arm64: dts: ls1028a: mark enetc port 3 as a DSA master too
From: Vladimir Oltean <olteanv@gmail.com>
Date: 2022-08-31 16:01:54
Also in:
linux-arm-kernel, linux-devicetree, lkml
Subsystem:
arm/freescale layerscape arm architecture, the rest · Maintainers:
Frank Li, Linus Torvalds
From: Vladimir Oltean <vladimir.oltean@nxp.com> The LS1028A switch has 2 internal links to the ENETC controller. With DSA's ability to support multiple CPU ports, we should mark both ENETC ports as DSA masters. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> --- v1->v2: keep 'status' property last arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 1215fcdf70fa..ac1c3a7e5f7a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi@@ -1169,6 +1169,7 @@ fixed-link { mscc_felix_port5: port@5 { reg = <5>; phy-mode = "internal"; + ethernet = <&enetc_port3>; status = "disabled"; fixed-link {
--
2.34.1