Thread (19 messages) 19 messages, 2 authors, 2022-08-31
STALE1370d REVIEWED: 4 (4M)
Revisions (4)
  1. v1 [diff vs current]
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v3 current

[PATCH net-next v4 08/17] net: dsa: microchip: KSZ9893: do not write to not supported Output Clock Control Register

From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: 2022-08-26 10:58:56
Also in: lkml
Subsystem: microchip ksz series ethernet switch driver, networking drivers, networking [dsa], the rest · Maintainers: Woojung Huh, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Linus Torvalds

This issue was detected after adding regmap register access validation.
KSZ9893 compatible chips do not have "Output Clock Control Register
0x0103". So, avoid writing to it.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
---
 drivers/net/dsa/microchip/ksz9477.c | 5 +++++
 1 file changed, 5 insertions(+)
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index f60ceaf25a66c..fb9de6b447b12 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -193,6 +193,11 @@ int ksz9477_reset_switch(struct ksz_device *dev)
 	ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
 	ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
 
+	/* KSZ9893 compatible chips do not support refclk configuration */
+	if (dev->chip_id == KSZ9893_CHIP_ID ||
+	    dev->chip_id == KSZ8563_CHIP_ID)
+		return 0;
+
 	data8 = SW_ENABLE_REFCLKO;
 	if (dev->synclko_disable)
 		data8 = 0;
-- 
2.30.2
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help