[PATCH 5/6] dt-bindings: net: explicitly list SPI CPHA and CPOL
From: Krzysztof Kozlowski <hidden>
Date: 2022-07-21 15:33:09
Also in:
dri-devel, linux-devicetree, linux-fbdev, linux-iio, linux-spi, lkml
Subsystem:
networking drivers, nfc subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, David Heidelberg, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The spi-cpha and spi-cpol properties are device specific and should be accepted only if device really needs them. Explicitly list them in device bindings in preparation of their removal from generic spi-peripheral-props.yaml schema. Signed-off-by: Krzysztof Kozlowski <redacted> --- .../devicetree/bindings/net/nfc/marvell,nci.yaml | 12 ++++++++++-- .../devicetree/bindings/net/vertexcom-mse102x.yaml | 12 +++++++++--- 2 files changed, 19 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml
index 1bcaf6ba822c..00b3918a9bf2 100644
--- a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml@@ -56,8 +56,16 @@ properties: description: | For UART type of connection. Specifies that the chip is using RTS/CTS. - spi-cpha: true - spi-cpol: true + spi-cpha: + type: boolean + description: + The device requires shifted clock phase (CPHA) mode. + + spi-cpol: + type: boolean + description: + The device requires inverse clock polarity (CPOL) mode. + spi-max-frequency: true required:
diff --git a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
index 8156a9aeb589..9dc1609f6d06 100644
--- a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
+++ b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml@@ -34,9 +34,15 @@ properties: interrupts: maxItems: 1 - spi-cpha: true - - spi-cpol: true + spi-cpha: + type: boolean + description: + The device requires shifted clock phase (CPHA) mode. + + spi-cpol: + type: boolean + description: + The device requires inverse clock polarity (CPOL) mode. spi-max-frequency: minimum: 6000000
--
2.34.1