-----Original Message-----
From: Sean Anderson <redacted>
Sent: Wednesday, July 20, 2022 2:50
To: netdev@vger.kernel.org; Andrew Lunn <andrew@lunn.ch>; Heiner
Kallweit [off-list ref]; Russell King [off-list ref]
Cc: Alexandru Marginean <redacted>; Paolo Abeni
[off-list ref]; David S . Miller [off-list ref]; linux-
kernel@vger.kernel.org; Vladimir Oltean [off-list ref]; Eric
Dumazet [off-list ref]; Jakub Kicinski [off-list ref];
Sean Anderson [off-list ref]; Bhadram Varka
[off-list ref]; Madalin Bucur [off-list ref]
Subject: [PATCH v2 01/11] net: dpaa: Fix <1G ethernet on LS1046ARDB

As discussed in commit 73a21fa817f0 ("dpaa_eth: support all modes with
rate adapting PHYs"), we must add a workaround for Aquantia phys with
in-tree support in order to keep 1G support working. Update this
workaround for the AQR113C phy found on revision C LS1046ARDB boards.

Fixes: 12cf1b89a668 ("net: phy: Add support for AQR113C EPHY")
Signed-off-by: Sean Anderson <redacted>
---
In a previous version of this commit, I referred to an AQR115, however
on further inspection this appears to be an AQR113C. Confusingly, the
higher-numbered phys support lower data rates.

(no changes since v1)

Acked-by: Camelia Groza <redacted>