Hello:

This series was applied to bluetooth/bluetooth-next.git (master)
by Marcel Holtmann [off-list ref]:

On Mon, 30 May 2022 17:02:16 +0200 you wrote:

Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading.
Autobaud mode can also be required on some boards where the controller
device is using a non-standard baud rate when first powered on.

Only a limited subset of HCI commands are supported in autobaud mode.

These patches add a DT property, "brcm,requires-autobaud-mode", to control
autobaud mode selection.

[...]

Here is the summary with links:
  - [v3,1/2] dt-bindings: net: broadcom-bluetooth: Add property for autobaud mode
    https://git.kernel.org/bluetooth/bluetooth-next/c/6d912cc3c21f
  - [v3,2/2] Bluetooth: hci_bcm: Add support for FW loading in autobaud mode
    https://git.kernel.org/bluetooth/bluetooth-next/c/3f125894bed7

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html