Re: [PATCH 19/30] panic: Add the panic hypervisor notifier list

From
Guilherme G. Piccoli <gpiccoli@igalia.com>
Date
2022-05-16 15:07:34
Also in
kexec, linux-alpha, linux-edac, linux-hyperv, linux-leds, linux-mips, linux-pm, linux-remoteproc, linux-s390, linux-tegra, linux-um, linuxppc-dev, lkml, rcu, sparclinux, xen-devel
Reply to
Petr Mladek, 2022-05-16
Thanks for the review!

I agree with the blinking stuff, I can rework and add all LED/blinking
stuff into the loop list, it does make sense. I'll comment a bit in the
others below...

On 16/05/2022 11:01, Petr Mladek wrote:
[...]
quoted
--- a/arch/mips/sgi-ip22/ip22-reset.c
+++ b/arch/mips/sgi-ip22/ip22-reset.c
@@ -195,7 +195,7 @@ static int __init reboot_setup(void)
 	}
 
 	timer_setup(&blink_timer, blink_timeout, 0);
-	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
+	atomic_notifier_chain_register(&panic_hypervisor_list, &panic_block);
This notifier enables blinking. It is not much safe. It calls
mod_timer() that takes a lock internally.

This kind of functionality should go into the last list called
before panic() enters the infinite loop. IMHO, all the blinking
stuff should go there.
[...] 
quoted
--- a/arch/mips/sgi-ip32/ip32-reset.c
+++ b/arch/mips/sgi-ip32/ip32-reset.c
@@ -145,7 +144,7 @@ static __init int ip32_reboot_setup(void)
 	pm_power_off = ip32_machine_halt;
 
 	timer_setup(&blink_timer, blink_timeout, 0);
-	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
+	atomic_notifier_chain_register(&panic_hypervisor_list, &panic_block);
Same here. Should be done only before the "loop".
[...] 
Ack.

quoted
--- a/drivers/firmware/google/gsmi.c
+++ b/drivers/firmware/google/gsmi.c
@@ -1034,7 +1034,7 @@ static __init int gsmi_init(void)
 
 	register_reboot_notifier(&gsmi_reboot_notifier);
 	register_die_notifier(&gsmi_die_notifier);
-	atomic_notifier_chain_register(&panic_notifier_list,
+	atomic_notifier_chain_register(&panic_hypervisor_list,
 				       &gsmi_panic_notifier);
I am not sure about this one. It looks like some logging or
pre_reboot stuff.
Disagree here. I'm looping Google maintainers, so they can comment.
(CCed Evan, David, Julius)

This notifier is clearly a hypervisor notification mechanism. I've fixed
a locking stuff there (in previous patch), I feel it's low-risk but even
if it's mid-risk, the class of such callback remains a perfect fit with
the hypervisor list IMHO.

[...] 
quoted
--- a/drivers/leds/trigger/ledtrig-activity.c
+++ b/drivers/leds/trigger/ledtrig-activity.c
@@ -247,7 +247,7 @@ static int __init activity_init(void)
 	int rc = led_trigger_register(&activity_led_trigger);
 
 	if (!rc) {
-		atomic_notifier_chain_register(&panic_notifier_list,
+		atomic_notifier_chain_register(&panic_hypervisor_list,
 					       &activity_panic_nb);
The notifier is trivial. It just sets a variable.

But still, it is about blinking and should be done
in the last "loop" list.

quoted
 		register_reboot_notifier(&activity_reboot_nb);
 	}
--- a/drivers/leds/trigger/ledtrig-heartbeat.c
+++ b/drivers/leds/trigger/ledtrig-heartbeat.c
@@ -190,7 +190,7 @@ static int __init heartbeat_trig_init(void)
 	int rc = led_trigger_register(&heartbeat_led_trigger);
 
 	if (!rc) {
-		atomic_notifier_chain_register(&panic_notifier_list,
+		atomic_notifier_chain_register(&panic_hypervisor_list,
 					       &heartbeat_panic_nb);
Same here. Blinking => loop list.
Ack.

quoted
[...]
diff --git a/drivers/misc/bcm-vk/bcm_vk_dev.c b/drivers/misc/bcm-vk/bcm_vk_dev.c
index a16b99bdaa13..d9d5199cdb2b 100644
--- a/drivers/misc/bcm-vk/bcm_vk_dev.c
+++ b/drivers/misc/bcm-vk/bcm_vk_dev.c
@@ -1446,7 +1446,7 @@ static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* register for panic notifier */
 	vk->panic_nb.notifier_call = bcm_vk_on_panic;
-	err = atomic_notifier_chain_register(&panic_notifier_list,
+	err = atomic_notifier_chain_register(&panic_hypervisor_list,
 					     &vk->panic_nb);
It seems to reset some hardware or so. IMHO, it should go into the
pre-reboot list.
Mixed feelings here, I'm looping Broadcom maintainers to comment.
(CC Scott and Broadcom list)

I'm afraid it breaks kdump if this device is not reset beforehand - it's
a doorbell write, so not high risk I think...

But in case the not-reset device can be probed normally in kdump kernel,
then I'm fine in moving this to the reboot list! I don't have the HW to
test myself.

[...]
quoted
--- a/drivers/power/reset/ltc2952-poweroff.c
+++ b/drivers/power/reset/ltc2952-poweroff.c
@@ -279,7 +279,7 @@ static int ltc2952_poweroff_probe(struct platform_device *pdev)
 	pm_power_off = ltc2952_poweroff_kill;
 
 	data->panic_notifier.notifier_call = ltc2952_poweroff_notify_panic;
-	atomic_notifier_chain_register(&panic_notifier_list,
+	atomic_notifier_chain_register(&panic_hypervisor_list,
 				       &data->panic_notifier);
I looks like this somehow triggers the reboot. IMHO, it should go
into the pre_reboot list.
Mixed feeling again here - CCing the maintainers for comments (Sebastian
/ PM folks).

This is setting a variable only, and once it's set (data->kernel_panic
is the bool's name), it just bails out the IRQ handler and a timer
setting - this timer seems kinda tricky, so bailing out ASAP makes sense
IMHO.

But my mixed feeling comes from the fact this notifier really is not a
fit to any list - it's just a "watchdog"/device quiesce in some form.
Since it's very low-risk (IIUC), I've put it here.

[...]
quoted
--- a/drivers/soc/bcm/brcmstb/pm/pm-arm.c
+++ b/drivers/soc/bcm/brcmstb/pm/pm-arm.c
@@ -814,7 +814,7 @@ static int brcmstb_pm_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	atomic_notifier_chain_register(&panic_notifier_list,
+	atomic_notifier_chain_register(&panic_hypervisor_list,
 				       &brcmstb_pm_panic_nb);
I am not sure about this one. It instruct some HW to preserve DRAM.
IMHO, it better fits into pre_reboot category but I do not have
strong opinion.
Disagree here, I'm CCing Florian for information.

This notifier preserves RAM so it's *very interesting* if we have
kmsg_dump() for example, but maybe might be also relevant in case kdump
kernel is configured to store something in a persistent RAM (then,
without this notifier, after kdump reboots the system data would be lost).

Cheers,


Guilherme
Thread (175 messages) 175 messages, 28 authors, last reply 2022-05-24
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help