[PATCH 3/6] dt-bindings: net: Add documentation for phy-supply
From: Corentin Labbe <clabbe@baylibre.com>
Date: 2022-05-09 07:53:00
Also in:
linux-arm-kernel, linux-devicetree, linux-sunxi, lkml
Subsystem:
ethernet phy library, networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add entries for the 2 new phy-supply and phy-io-supply. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> --- .../devicetree/bindings/net/ethernet-phy.yaml | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index ed1415a4381f..2a6b45ddf010 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml@@ -153,6 +153,16 @@ properties: used. The absence of this property indicates the muxers should be configured so that the external PHY is used. + phy-supply: + description: + Phandle to a regulator that provides power to the PHY. This + regulator will be managed during the PHY power on/off sequence. + + phy-io-supply: + description: + Phandle to a regulator that provides power to the PHY. This + regulator will be managed during the PHY power on/off sequence. + resets: maxItems: 1
--
2.35.1