[PATCH net-next v2 1/2] net: phy: genphy_c45_baset1_an_config_aneg: do no set unknown configuration
From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: 2022-05-04 11:07:17
Also in:
lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Do not change default master/slave autoneg configuration if no
changes was requested.
Fixes: 3da8ffd8545f ("net: phy: Add 10BASE-T1L support in phy-c45")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
drivers/net/phy/phy-c45.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index eefdd67d5556..0014aa6e73c0 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c@@ -191,8 +191,12 @@ static int genphy_c45_baset1_an_config_aneg(struct phy_device *phydev) case MASTER_SLAVE_CFG_MASTER_PREFERRED: case MASTER_SLAVE_CFG_SLAVE_PREFERRED: break; + case MASTER_SLAVE_CFG_UNKNOWN: + case MASTER_SLAVE_CFG_UNSUPPORTED: + return 0; default: - break; + phydev_warn(phydev, "Unsupported Master/Slave mode\n"); + return -EOPNOTSUPP; } switch (phydev->master_slave_set) {
--
2.30.2