On Tue, Mar 01, 2022 at 11:03:12AM +0100, Tobias Waldekranz wrote:

Allow the user to switch from the current per-VLAN STP mode to an MST
mode.

Up to this point, per-VLAN STP states where always isolated from each
other. This is in contrast to the MSTP standard (802.1Q-2018, Clause
13.5), where VLANs are grouped into MST instances (MSTIs), and the
state is managed on a per-MSTI level, rather that at the per-VLAN
level.

Perhaps due to the prevalence of the standard, many switching ASICs
are built after the same model. Therefore, add a corresponding MST
mode to the bridge, which we can later add offloading support for in a
straight-forward way.

For now, all VLANs are fixed to MSTI 0, also called the Common
Spanning Tree (CST). That is, all VLANs will follow the port-global
state.

Upcoming changes will make this actually useful by allowing VLANs to
be mapped to arbitrary MSTIs and allow individual MSTI states to be
changed.

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
---
+void br_mst_vlan_set_state(struct net_bridge_port *p, struct net_bridge_vlan *v,
+			   u8 state)

Function can be static.

+{
+	struct net_bridge_vlan_group *vg = nbp_vlan_group(p);
+
+	if (v->state == state)
+		return;
+
+	br_vlan_set_state(v, state);
+
+	if (v->vid == vg->pvid)
+		br_vlan_set_pvid_state(vg, state);
+}