On Fri, Mar 25, 2022 at 03:08:08PM +0100, Francesco Dolcini wrote:

Hello Andrew and all,
I was recently debugging an issue in the FEC driver, about 2% of the
time the driver is failing with "MDIO read timeout" at boot on a 5.4
kernel.

This issue is not new and from time to time appear again, it seems that
the previous interrupt based mechanism is somehow easy to break.

I backported your patch
f166f890c8f0 (net: ethernet: fec: Replace interrupt driven MDIO with polled IO, 2020-05-02)
to kernel 5.4 and it seems that it fixes the issue (I was able to do 470
power cycles, while before it was failing after a couple of hundreds
cycles best case).

Shouldn't this patch be backported to kernel 5.4? 

Hi Francesco

This patch was purely a performance boost, it was not a bug fix in any
way. That change also caused a lot of pain. There are at least two
different implementations of the MDIO bus in the FEC, and they
behaviour slightly differently. So what worked for me with the Vybrid
broke some other platforms. It took an NXP software engineer talking
to there hardware guys to figure out how to do this correctly. Which
is why you will see a complicated patch history.

I personally would not recommend a back port, unless you can test the
back port on a wide range of SoC with the FEC.

If you are getting timeouts, i would suggest you look at whatever else
is happening in the system during boot. Are interrupts getting
disabled for too long? Is something blocking the running of the
completion?

Or just update to v5.15.

   Andrew