[PATCH 11/49] qed: replace bitmap_weight with bitmap_empty in qed_roce_stop()
From: Yury Norov <yury.norov@gmail.com>
Date: 2022-02-10 23:16:18
Also in:
lkml
Subsystem:
networking drivers, qlogic ql4xxx ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2022-02-15 · RE: [PATCH 11/49] qed: replace bitmap_weight with bitmap_empty in qed_roce_stop() · Prabhakar Kushwaha <hidden>
qed_roce_stop() calls bitmap_weight() to check if any bit of a given bitmap is set. We can do it more efficiently with bitmap_empty() because bitmap_empty() stops traversing the bitmap as soon as it finds first set bit, while bitmap_weight() counts all bits unconditionally. Signed-off-by: Yury Norov <yury.norov@gmail.com> --- drivers/net/ethernet/qlogic/qed/qed_roce.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_roce.c b/drivers/net/ethernet/qlogic/qed/qed_roce.c
index 071b4aeaddf2..134ecfca96a3 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_roce.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_roce.c@@ -76,7 +76,7 @@ void qed_roce_stop(struct qed_hwfn *p_hwfn) * We delay for a short while if an async destroy QP is still expected. * Beyond the added delay we clear the bitmap anyway. */ - while (bitmap_weight(rcid_map->bitmap, rcid_map->max_count)) { + while (!bitmap_empty(rcid_map->bitmap, rcid_map->max_count)) { /* If the HW device is during recovery, all resources are * immediately reset without receiving a per-cid indication * from HW. In this case we don't expect the cid bitmap to be
--
2.32.0