On Tue, 2022-02-08 at 14:09 +0100, Andrew Lunn wrote:

EXTERNAL EMAIL: Do not click links or open attachments unless you know the
content is safe

On Mon, Feb 07, 2022 at 10:51:57PM +0530, Prasanna Vengateshan wrote:

quoted

Added support for Microchip LAN937x T1 phy driver. The sequence of
initialization is used commonly for both LAN87xx and LAN937x
drivers. The new initialization sequence is an improvement to
existing LAN87xx and it is shared with LAN937x.

Also relevant comments are added in the existing code and existing
soft-reset customized code has been replaced with
genphy_soft_reset().

access_ereg_clr_poll_timeout() API is introduced for polling phy
bank write and this is linked with PHYACC_ATTR_MODE_POLL.

Finally introduced function table for LAN937X_T1_PHY_ID along with
microchip_t1_phy_driver struct.

Hi Prasanna

That is a lot of changes in one patch.

I would suggest you make this a patch series of its own. It should be
independent of the switch changes. And then you can break this patch
up into a number of smaller patches.

Thanks
        Andrew

Sure, i will submit as a seperate patch series and i will remove from this
patch. Thanks.

Prasanna V