[PATCH net-next 2/4] net: dsa: ocelot: remove interface checks
From: Russell King (Oracle) <hidden>
Date: 2022-02-25 16:19:45
Subsystem:
networking drivers, networking [dsa], ocelot ethernet switch driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Vladimir Oltean, Linus Torvalds
When the supported interfaces bitmap is populated, phylink will itself check that the interface mode is present in this bitmap. Drivers no longer need to perform this check themselves. Remove these checks. Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Russell King (Oracle) <redacted> --- drivers/net/dsa/ocelot/felix_vsc9959.c | 7 ------- drivers/net/dsa/ocelot/seville_vsc9953.c | 7 ------- 2 files changed, 14 deletions(-)
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 33f0ceae381d..434c7e4f0648 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c@@ -944,15 +944,8 @@ static void vsc9959_phylink_validate(struct ocelot *ocelot, int port, unsigned long *supported, struct phylink_link_state *state) { - struct ocelot_port *ocelot_port = ocelot->ports[port]; __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - if (state->interface != PHY_INTERFACE_MODE_NA && - state->interface != ocelot_port->phy_mode) { - linkmode_zero(supported); - return; - } - phylink_set_port_modes(mask); phylink_set(mask, Autoneg); phylink_set(mask, Pause);
diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c
index f2f1608a476c..f12c1a1a3d5c 100644
--- a/drivers/net/dsa/ocelot/seville_vsc9953.c
+++ b/drivers/net/dsa/ocelot/seville_vsc9953.c@@ -917,15 +917,8 @@ static void vsc9953_phylink_validate(struct ocelot *ocelot, int port, unsigned long *supported, struct phylink_link_state *state) { - struct ocelot_port *ocelot_port = ocelot->ports[port]; __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - if (state->interface != PHY_INTERFACE_MODE_NA && - state->interface != ocelot_port->phy_mode) { - linkmode_zero(supported); - return; - } - phylink_set_port_modes(mask); phylink_set(mask, Autoneg); phylink_set(mask, Pause);
--
2.30.2