[PATCH net-next 6/6] net: dsa: sja1105: support switching between SGMII and 2500BASE-X
From: Russell King (Oracle) <hidden>
Date: 2022-02-25 11:56:40
Subsystem:
networking drivers, networking [dsa], the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds
Vladimir Oltean suggests that sja1105 can support switching between SGMII and 2500BASE-X modes. Augment sja1105_phylink_get_caps() to fill in both interface modes if they can be supported. Signed-off-by: Russell King (Oracle) <redacted> --- drivers/net/dsa/sja1105/sja1105_main.c | 27 +++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-)
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 5beef06d8ff7..8fc309446e1e 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c@@ -1396,6 +1396,7 @@ static void sja1105_phylink_get_caps(struct dsa_switch *ds, int port, { struct sja1105_private *priv = ds->priv; struct sja1105_xmii_params_entry *mii; + phy_interface_t phy_mode; /* This driver does not make use of the speed, duplex, pause or the * advertisement in its mac_config, so it is safe to mark this driver
@@ -1403,11 +1404,27 @@ static void sja1105_phylink_get_caps(struct dsa_switch *ds, int port, */ config->legacy_pre_march2020 = false; - /* The SJA1105 MAC programming model is through the static config - * (the xMII Mode table cannot be dynamically reconfigured), and - * we have to program that early. - */ - __set_bit(priv->phy_mode[port], config->supported_interfaces); + phy_mode = priv->phy_mode[port]; + if (phy_mode == PHY_INTERFACE_MODE_SGMII || + phy_mode == PHY_INTERFACE_MODE_2500BASEX) { + /* Changing the PHY mode on SERDES ports is possible and makes + * sense, because that is done through the XPCS. We allow + * changes between SGMII and 2500base-X. + */ + if (priv->info->supports_sgmii[port]) + __set_bit(PHY_INTERFACE_MODE_SGMII, + config->supported_interfaces); + + if (priv->info->supports_2500basex[port]) + __set_bit(PHY_INTERFACE_MODE_2500BASEX, + config->supported_interfaces); + } else { + /* The SJA1105 MAC programming model is through the static + * config (the xMII Mode table cannot be dynamically + * reconfigured), and we have to program that early. + */ + __set_bit(phy_mode, config->supported_interfaces); + } /* The MAC does not support pause frames, and also doesn't * support half-duplex traffic modes.
--
2.30.2