[RFC PATCH v7 09/16] net: dsa: qca8k: add tracking state of master port
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: 2022-01-23 01:34:34
Also in:
lkml
Subsystem:
networking drivers, networking [dsa], the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Linus Torvalds
MDIO/MIB Ethernet require the master port and the tagger availabale to correctly work. Use the new api master_state_change to track when master is operational or not and set a bool in qca8k_priv. We cache the first cached master available and we check if other cpu port are operational when the cached one goes down. This cached master will later be used by mdio read/write and mib request to correctly use the working function. qca8k implementation for MDIO/MIB Ethernet is bad. CPU port0 is the only one that answers with the ack packet or sends MIB Ethernet packets. For this reason the master_state_change ignore CPU port6 and checkes only CPU port0 if it's operational and enables this mode. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> --- drivers/net/dsa/qca8k.c | 18 ++++++++++++++++++ drivers/net/dsa/qca8k.h | 1 + 2 files changed, 19 insertions(+)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 039694518788..4bc5064414b5 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c@@ -2383,6 +2383,23 @@ qca8k_port_lag_leave(struct dsa_switch *ds, int port, return qca8k_lag_refresh_portmap(ds, port, lag, true); } +static void +qca8k_master_change(struct dsa_switch *ds, const struct net_device *master, + bool operational) +{ + struct dsa_port *dp = master->dsa_ptr; + struct qca8k_priv *priv = ds->priv; + + /* Ethernet MIB/MDIO is only supported for CPU port 0 */ + if (dp->index != 0) + return; + + if (operational) + priv->mgmt_master = master; + else + priv->mgmt_master = NULL; +} + static const struct dsa_switch_ops qca8k_switch_ops = { .get_tag_protocol = qca8k_get_tag_protocol, .setup = qca8k_setup,
@@ -2418,6 +2435,7 @@ static const struct dsa_switch_ops qca8k_switch_ops = { .get_phy_flags = qca8k_get_phy_flags, .port_lag_join = qca8k_port_lag_join, .port_lag_leave = qca8k_port_lag_leave, + .master_state_change = qca8k_master_change, }; static int qca8k_read_switch_id(struct qca8k_priv *priv)
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index ab4a417b25a9..9437369c60ca 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h@@ -353,6 +353,7 @@ struct qca8k_priv { struct dsa_switch_ops ops; struct gpio_desc *reset_gpio; unsigned int port_mtu[QCA8K_NUM_PORTS]; + const struct net_device *mgmt_master; /* Track if mdio/mib Ethernet is available */ }; struct qca8k_mib_desc {
--
2.33.1