RE: [PATCH 0/9] rtw88: prepare locking for SDIO support

-----Original Message-----
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Sent: Wednesday, December 29, 2021 5:15 AM
To: linux-wireless@vger.kernel.org
Cc: tony0620emma@gmail.com; kvalo@codeaurora.org; johannes@sipsolutions.net; netdev@vger.kernel.org;
linux-kernel@vger.kernel.org; Neo Jou [off-list ref]; Jernej Skrabec [off-list ref];
Pkshih [off-list ref]; Martin Blumenstingl [off-list ref]
Subject: [PATCH 0/9] rtw88: prepare locking for SDIO support

Hello rtw88 and mac80211 maintainers/contributors,

there is an ongoing effort where Jernej and I are working on adding
SDIO support to the rtw88 driver [0].
The hardware we use at the moment is RTL8822BS and RTL8822CS.
We are at a point where scanning, assoc etc. works (though it's not
fast yet, in my tests I got ~6Mbit/s in either direction).

Could I know if you have improvement of this throughput issue?

I have done simple test of this patchset on RTL8822CE, and it works
well. But, I think I don't test all flows yet, so I will do more
test that will take a while. After that, I can give a Tested-by tag.

Thank you
Ping-Ke