Re: [PATCH net-next 1/8] can: bittiming: replace CAN units with the generic ones from linux/units.h

Hello:

This series was applied to netdev/net-next.git (master)
by Marc Kleine-Budde [off-list ref]:

On Wed,  8 Dec 2021 13:50:48 +0100 you wrote:

From: Vincent Mailhol <redacted>

In [1], we introduced a set of units in linux/can/bittiming.h. Since
then, generic SI prefixes were added to linux/units.h in [2]. Those
new prefixes can perfectly replace CAN specific ones.

This patch replaces all occurrences of the CAN units with their
corresponding prefix (from linux/units) and the unit (as a comment)
according to below table.

[...]

Here is the summary with links:
  - [net-next,1/8] can: bittiming: replace CAN units with the generic ones from linux/units.h
    https://git.kernel.org/netdev/net-next/c/330c6d3bfa26
  - [net-next,2/8] dt-bindings: net: can: add support for Allwinner R40 CAN controller
    https://git.kernel.org/netdev/net-next/c/d0342ceb78ed
  - [net-next,3/8] can: sun4i_can: add support for R40 CAN controller
    https://git.kernel.org/netdev/net-next/c/2c2fd0e68d9e
  - [net-next,4/8] ARM: dts: sun8i: r40: add node for CAN controller
    https://git.kernel.org/netdev/net-next/c/671f852c1bee
  - [net-next,5/8] can: hi311x: hi3110_can_probe(): use devm_clk_get_optional() to get the input clock
    https://git.kernel.org/netdev/net-next/c/369cf4e6ac53
  - [net-next,6/8] can: hi311x: hi3110_can_probe(): try to get crystal clock rate from property
    https://git.kernel.org/netdev/net-next/c/3a1ae63a4d21
  - [net-next,7/8] can: hi311x: hi3110_can_probe(): make use of device property API
    https://git.kernel.org/netdev/net-next/c/dc64d98aae75
  - [net-next,8/8] can: hi311x: hi3110_can_probe(): convert to use dev_err_probe()
    https://git.kernel.org/netdev/net-next/c/6a93ea382177

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html