[PATCH net v4] bonding: fix ad_actor_system option setting to default
From: Fernando Fernandez Mancera <hidden>
Date: 2021-12-21 11:14:28
Also in:
linux-doc
Subsystem:
bonding driver, documentation, networking drivers, networking [general], the rest · Maintainers:
Jay Vosburgh, Jonathan Corbet, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
When 802.3ad bond mode is configured the ad_actor_system option is set to
"00:00:00:00:00:00". But when trying to set the all-zeroes MAC as actors'
system address it was failing with EINVAL.
An all-zeroes ethernet address is valid, only multicast addresses are not
valid values.
Fixes: 171a42c38c6e ("bonding: add netlink support for sys prio, actor sys mac, and port key")
Signed-off-by: Fernando Fernandez Mancera <redacted>
Acked-by: Jay Vosburgh <redacted>
---
v2: added documentation changes and modified commit message
v3: fixed format warning on commit message
v4: added fixes tag and ACK from Jay Vosburgh
---
Documentation/networking/bonding.rst | 11 ++++++-----
drivers/net/bonding/bond_options.c | 2 +-
2 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/Documentation/networking/bonding.rst b/Documentation/networking/bonding.rst
index 31cfd7d674a6..c0a789b00806 100644
--- a/Documentation/networking/bonding.rst
+++ b/Documentation/networking/bonding.rst@@ -196,11 +196,12 @@ ad_actor_sys_prio ad_actor_system In an AD system, this specifies the mac-address for the actor in - protocol packet exchanges (LACPDUs). The value cannot be NULL or - multicast. It is preferred to have the local-admin bit set for this - mac but driver does not enforce it. If the value is not given then - system defaults to using the masters' mac address as actors' system - address. + protocol packet exchanges (LACPDUs). The value cannot be a multicast + address. If the all-zeroes MAC is specified, bonding will internally + use the MAC of the bond itself. It is preferred to have the + local-admin bit set for this mac but driver does not enforce it. If + the value is not given then system defaults to using the masters' + mac address as actors' system address. This parameter has effect only in 802.3ad mode and is available through SysFs interface.
diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c
index a8fde3bc458f..b93337b5a721 100644
--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c@@ -1526,7 +1526,7 @@ static int bond_option_ad_actor_system_set(struct bonding *bond, mac = (u8 *)&newval->value; } - if (!is_valid_ether_addr(mac)) + if (is_multicast_ether_addr(mac)) goto err; netdev_dbg(bond->dev, "Setting ad_actor_system to %pM\n", mac);
--
2.30.2