[PATCH net 1/2] r8152: fix the force speed doesn't work for RTL8156
flat view
STALE1757d
From: Hayes Wang <hidden>
Date: 2021-12-23 09:28:40
Also in:
lkml
Subsystem:
networking drivers, the rest, usb networking drivers · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
It needs to set mdio force mode. Otherwise, link off always occurs when
setting force speed.
Fixes: 195aae321c82 ("r8152: support new chips")
Signed-off-by: Hayes Wang <redacted>
---
drivers/net/usb/r8152.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f9877a3e83ac..a817dfd5c9eb 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c@@ -6584,6 +6584,21 @@ static bool rtl8153_in_nway(struct r8152 *tp) return true; } +static void r8156_mdio_force_mode(struct r8152 *tp) +{ + u16 data; + + /* Select force mode through 0xa5b4 bit 15 + * 0: MDIO force mode + * 1: MMD force mode + */ + data = ocp_reg_read(tp, 0xa5b4); + if (data & BIT(15)) { + data &= ~BIT(15); + ocp_reg_write(tp, 0xa5b4, data); + } +} + static void set_carrier(struct r8152 *tp) { struct net_device *netdev = tp->netdev;
@@ -8016,6 +8031,7 @@ static void r8156_init(struct r8152 *tp) ocp_data |= ACT_ODMA; ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ocp_data); + r8156_mdio_force_mode(tp); rtl_tally_reset(tp); tp->coalesce = 15000; /* 15 us */
@@ -8145,6 +8161,7 @@ static void r8156b_init(struct r8152 *tp) ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN); ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); + r8156_mdio_force_mode(tp); rtl_tally_reset(tp); tp->coalesce = 15000; /* 15 us */
--
2.31.1