[PATCH 12/16] pinctrl: renesas: Kconfig: Select PINCTRL_RZG2L if RZ/V2L SoC is enabled
flat view
STALE1738d
SUPERSEDED
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: 2021-12-21 09:48:47
Also in:
dmaengine, linux-clk, linux-devicetree, linux-gpio, linux-renesas-soc, linux-serial, lkml
Subsystem:
pin control subsystem, pin controller - renesas, the rest · Maintainers:
Linus Walleij, Geert Uytterhoeven, Linus Torvalds
Status: Superseded by v2 (posted 2022-01-10). [go to v2]
Revision v1 (2 revisions archived).
Revisions (2)
- v1 current
- v2 [diff against previous]
From: Biju Das <biju.das.jz@bp.renesas.com> Enable RZ/G2L pinctrl driver if RZ/V2L (R9A07G054) if ARCH_R9A07G054 is enabled. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> --- drivers/pinctrl/renesas/Kconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/pinctrl/renesas/Kconfig b/drivers/pinctrl/renesas/Kconfig
index 9a72999084b3..89f5ca76ab83 100644
--- a/drivers/pinctrl/renesas/Kconfig
+++ b/drivers/pinctrl/renesas/Kconfig@@ -38,6 +38,7 @@ config PINCTRL_RENESAS select PINCTRL_PFC_R8A77995 if ARCH_R8A77995 select PINCTRL_PFC_R8A779A0 if ARCH_R8A779A0 select PINCTRL_RZG2L if ARCH_R9A07G044 + select PINCTRL_RZG2L if ARCH_R9A07G054 select PINCTRL_PFC_SH7203 if CPU_SUBTYPE_SH7203 select PINCTRL_PFC_SH7264 if CPU_SUBTYPE_SH7264 select PINCTRL_PFC_SH7269 if CPU_SUBTYPE_SH7269
--
2.17.1