[PATCH] dsa: mv88e6xxx: fix debug print for SPEED_UNFORCED
flat view
STALE1775d
From: Andrey Eremeev <hidden>
Date: 2021-12-15 17:36:34
Also in:
lkml
Subsystem:
marvell 88e6xxx ethernet switch fabric driver, networking drivers, networking [dsa], the rest · Maintainers:
Andrew Lunn, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Linus Torvalds
Debug print uses invalid check to detect if speed is unforced:
(speed != SPEED_UNFORCED) should be used instead of (!speed).
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Andrey Eremeev <redacted>
Fixes: 96a2b40c7bd3 ("net: dsa: mv88e6xxx: add port's MAC speed setter")
---
drivers/net/dsa/mv88e6xxx/port.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c
index d9817b20ea64..ab41619a809b 100644
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c@@ -283,7 +283,7 @@ static int mv88e6xxx_port_set_speed_duplex(struct mv88e6xxx_chip *chip, if (err) return err; - if (speed) + if (speed != SPEED_UNFORCED) dev_dbg(chip->dev, "p%d: Speed set to %d Mbps\n", port, speed); else dev_dbg(chip->dev, "p%d: Speed unforced\n", port);
@@ -516,7 +516,7 @@ int mv88e6393x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port, if (err) return err; - if (speed) + if (speed != SPEED_UNFORCED) dev_dbg(chip->dev, "p%d: Speed set to %d Mbps\n", port, speed); else dev_dbg(chip->dev, "p%d: Speed unforced\n", port); --
2.30.1 (Apple Git-130)