Re: [PATCH v2] rtw88: Disable PCIe ASPM while doing NAPI poll on 8821CE

On Tue, Dec 14, 2021 at 1:46 PM Kalle Valo [off-list ref] wrote:

Kai-Heng Feng [off-list ref] writes:

quoted

Many Intel based platforms face system random freeze after commit
9e2fd29864c5 ("rtw88: add napi support").

The commit itself shouldn't be the culprit. My guess is that the 8821CE
only leaves ASPM L1 for a short period when IRQ is raised. Since IRQ is
masked during NAPI polling, the PCIe link stays at L1 and makes RX DMA
extremely slow. Eventually the RX ring becomes messed up:
[ 1133.194697] rtw_8821ce 0000:02:00.0: pci bus timeout, check dma status

Since the 8821CE hardware may fail to leave ASPM L1, manually do it in
the driver to resolve the issue.

Fixes: 9e2fd29864c5 ("rtw88: add napi support")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215131
BugLink: https://bugs.launchpad.net/bugs/1927808
Signed-off-by: Kai-Heng Feng <redacted>

[...]

quoted

 static bool rtw_disable_msi;
 static bool rtw_pci_disable_aspm;
+static int rtw_rx_aspm = -1;
 module_param_named(disable_msi, rtw_disable_msi, bool, 0644);
 module_param_named(disable_aspm, rtw_pci_disable_aspm, bool, 0644);
+module_param_named(rx_aspm, rtw_rx_aspm, int, 0444);
 MODULE_PARM_DESC(disable_msi, "Set Y to disable MSI interrupt support");
 MODULE_PARM_DESC(disable_aspm, "Set Y to disable PCI ASPM support");
+MODULE_PARM_DESC(rx_aspm, "Use PCIe ASPM for RX (0=disable, 1=enable, -1=default)")

We already have disable_aspm parameter, why do we need yet another one?
There's a high bar for new module parameters.

It's a good way for (un)affected users to try out different settings.
But yes the parameter isn't necessary. Let me send another version without it.

Kai-Heng

--
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches