[PATCH net] net: dsa: b53: Add SPI ID table
flat view
STALE1785d
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2021-12-02 04:17:35
Also in:
lkml
Subsystem:
broadcom b53/sf2 ethernet switch driver, networking drivers, networking [dsa], the rest · Maintainers:
Florian Fainelli, Jonas Gorski, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds
Currently autoloading for SPI devices does not use the DT ID table, it
uses SPI modalises. Supporting OF modalises is going to be difficult if
not impractical, an attempt was made but has been reverted, so ensure
that module autoloading works for this driver by adding an id_table
listing the SPI IDs for everything.
Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/b53/b53_spi.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/net/dsa/b53/b53_spi.c b/drivers/net/dsa/b53/b53_spi.c
index 01e37b75471e..2b88f03e5252 100644
--- a/drivers/net/dsa/b53/b53_spi.c
+++ b/drivers/net/dsa/b53/b53_spi.c@@ -349,6 +349,19 @@ static const struct of_device_id b53_spi_of_match[] = { }; MODULE_DEVICE_TABLE(of, b53_spi_of_match); +static const struct spi_device_id b53_spi_ids[] = { + { .name = "bcm5325" }, + { .name = "bcm5365" }, + { .name = "bcm5395" }, + { .name = "bcm5397" }, + { .name = "bcm5398" }, + { .name = "bcm53115" }, + { .name = "bcm53125" }, + { .name = "bcm53128" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(spi, b53_spi_ids); + static struct spi_driver b53_spi_driver = { .driver = { .name = "b53-switch",
@@ -357,6 +370,7 @@ static struct spi_driver b53_spi_driver = { .probe = b53_spi_probe, .remove = b53_spi_remove, .shutdown = b53_spi_shutdown, + .id_table = b53_spi_ids, }; module_spi_driver(b53_spi_driver);
--
2.25.1