[PATCH 4/4] can: esd_402_pci: do not increase rx_bytes statistics for RTR frames

The actual payload length of the CAN Remote Transmission Request (RTR)
frames is always 0, i.e. nothing is transmitted on the wire. However,
those RTR frames still use the DLC to indicate the length of the
requested frame.

As such, net_device_stats:rx_bytes should not be increased for the RTR
frames.

This patch brings the esd_402_pci driver in line with the other CAN
drivers which have been changed after a suggestion of Vincent Mailhol.

Suggested-by: Vincent Mailhol <redacted>
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
---
 drivers/net/can/esd/esdacc.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/can/esd/esdacc.c b/drivers/net/can/esd/esdacc.c
index f74248662cd6..99c1e1bdd72d 100644
--- a/drivers/net/can/esd/esdacc.c
+++ b/drivers/net/can/esd/esdacc.c

@@ -483,15 +483,16 @@ static void handle_core_msg_rxtxdone(struct acc_core *core,
 		can_frame_set_cc_len(cf, msg->dlc.rx.len & ACC_CAN_DLC_MASK,
 				     priv->can.ctrlmode);
 
-		if (msg->dlc.rx.len & ACC_CAN_RTR_FLAG)
+		if (msg->dlc.rx.len & ACC_CAN_RTR_FLAG) {
 			cf->can_id |= CAN_RTR_FLAG;
-		else
+		} else {
 			memcpy(cf->data, msg->data, cf->len);
+			stats->rx_bytes += cf->len;
+		}
+		stats->rx_packets++;
 
 		skb_hwtstamps(skb)->hwtstamp = acc_ts2ktime(priv->ov, msg->ts);
 
-		stats->rx_packets++;
-		stats->rx_bytes += cf->len;
 		netif_rx(skb);
 	}
 }

-- 
2.25.1