[PATCH net-next 1/2] arm64: dts: imx8mp-evk: configure multiple queues on eqos
flat view
STALE1779d
From: Xiaoliang Yang <hidden>
Date: 2021-12-01 01:35:18
Also in:
lkml
Subsystem:
arm/freescale imx / mxc / layerscape arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
Eqos ethernet support five queues on hardware, enable these queues and configure the priority of each queue. Uses Strict Priority as scheduling algorithms to ensure that the TSN function works. Signed-off-by: Xiaoliang Yang <redacted> --- arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 41 ++++++++++++++++++++ 1 file changed, 41 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 7b99fad6e4d6..1e523b3d122b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts@@ -86,6 +86,9 @@ pinctrl-0 = <&pinctrl_eqos>; phy-mode = "rgmii-id"; phy-handle = <ðphy0>; + snps,force_thresh_dma_mode; + snps,mtl-tx-config = <&mtl_tx_setup>; + snps,mtl-rx-config = <&mtl_rx_setup>; status = "okay"; mdio {
@@ -99,6 +102,44 @@ eee-broken-1000t; }; }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <5>; + queue0 { + snps,priority = <0x0>; + }; + queue1 { + snps,priority = <0x1>; + }; + queue2 { + snps,priority = <0x2>; + }; + queue3 { + snps,priority = <0x3>; + }; + queue4 { + snps,priority = <0x4>; + }; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <5>; + queue0 { + snps,priority = <0x0>; + }; + queue1 { + snps,priority = <0x1>; + }; + queue2 { + snps,priority = <0x2>; + }; + queue3 { + snps,priority = <0x3>; + }; + queue4 { + snps,priority = <0x4>; + }; + }; }; &fec {
--
2.17.1