Re: [PATCH net-next 1/3] net: amd-xgbe: Add Support for Yellow Carp Ethernet device
flat view
From: Tom Lendacky <thomas.lendacky@amd.com>
Date: 2021-12-17 14:28:07
On 12/17/21 5:15 AM, Raju Rangoju wrote:
quoted hunk ↗ jump to hunk
From: Raju Rangoju <Raju.Rangoju@amd.com> Yellow Carp Ethernet devices use the existing PCI ID but the window settings for the indirect PCS access have been altered. Add the check for Yellow Carp Ethernet devices to use the new register values. Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> --- drivers/net/ethernet/amd/xgbe/xgbe-common.h | 2 ++ drivers/net/ethernet/amd/xgbe/xgbe-pci.c | 12 ++++++++---- 2 files changed, 10 insertions(+), 4 deletions(-)diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-common.h b/drivers/net/ethernet/amd/xgbe/xgbe-common.h index 533b8519ec35..0075939121d1 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-common.h +++ b/drivers/net/ethernet/amd/xgbe/xgbe-common.h@@ -898,6 +898,8 @@ #define PCS_V2_WINDOW_SELECT 0x9064 #define PCS_V2_RV_WINDOW_DEF 0x1060 #define PCS_V2_RV_WINDOW_SELECT 0x1064 +#define PCS_V2_YC_WINDOW_DEF 0x18060 +#define PCS_V2_YC_WINDOW_SELECT 0x18064 /* PCS register entry bit positions and sizes */ #define PCS_V2_WINDOW_DEF_OFFSET_INDEX 6diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-pci.c b/drivers/net/ethernet/amd/xgbe/xgbe-pci.c index 90cb55eb5466..39e606c4d653 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-pci.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-pci.c@@ -274,10 +274,14 @@ static int xgbe_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) /* Set the PCS indirect addressing definition registers */ rdev = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(0, 0)); - if (rdev && - (rdev->vendor == PCI_VENDOR_ID_AMD) && (rdev->device == 0x15d0)) { - pdata->xpcs_window_def_reg = PCS_V2_RV_WINDOW_DEF; - pdata->xpcs_window_sel_reg = PCS_V2_RV_WINDOW_SELECT; + if (rdev && rdev->vendor == PCI_VENDOR_ID_AMD) { + if (rdev->device == 0x15d0) { + pdata->xpcs_window_def_reg = PCS_V2_RV_WINDOW_DEF; + pdata->xpcs_window_sel_reg = PCS_V2_RV_WINDOW_SELECT; + } else if (rdev->device == 0x14b5) { + pdata->xpcs_window_def_reg = PCS_V2_YC_WINDOW_DEF; + pdata->xpcs_window_sel_reg = PCS_V2_YC_WINDOW_SELECT; + }
Hmmm... now that I look at this, pdata->xpcs_window... won't be set for non RV or YC platforms, right? All rdev devices should have an AMD vendor ID and therefore always take the if path. But only RV and YC will set the values. So this needs to be reworked. Thanks, Tom
} else {
pdata->xpcs_window_def_reg = PCS_V2_WINDOW_DEF;
pdata->xpcs_window_sel_reg = PCS_V2_WINDOW_SELECT;