Re: [PATCH net-next v1] net: dsa: mv88e6xxx: Trap PTP traffic

On Mon Dec 13 2021, Richard Cochran wrote:

On Sat, Dec 11, 2021 at 07:39:26AM -0800, Richard Cochran wrote:

quoted

On Fri, Dec 10, 2021 at 09:14:10PM -0800, Jakub Kicinski wrote:

quoted

On Fri, 10 Dec 2021 01:07:59 +0100 Tobias Waldekranz wrote:

quoted

Do we know how PTP is supposed to work in relation to things like STP?
I.e should you be able to run PTP over a link that is currently in
blocking?

Not sure if I'm missing the real question but IIRC the standard
calls out that PTP clock distribution tree can be different that
the STP tree, ergo PTP ignores STP forwarding state.

That is correct.  The PTP will form its own spanning tree, and that
might be different than the STP.  In fact, the Layer2 PTP messages
have special MAC addresses that are supposed to be sent
unconditionally, even over blocked ports.

Let me correct that statement.

I looked at 1588 again, and for E2E TC it states, "All PTP version 2
messages shall be forwarded according to the addressing rules of the
network."  I suppose that includes the STP state.

For P2P TC, there is an exception that the peer delay messages are not
forwarded.  These are generated and consumed by the switch.

The PTP spanning tree still is formed by the Boundary Clocks (BC), and
a Transparent Clock (TC) does not participate in forming the PTP
spanning tree.

What does this mean for Linux DSA switch drivers?

1. All incoming PTP frames should be forwarded to the CPU port, so
   that the software stack may perform its BC or TC functions.

2. When used as a BC, the PTP frames sent from the CPU port should not
   be dropped.

3. When used as a TC, PTP frames sent from the CPU port can be dropped
   on blocked external ports, except for the Peer Delay messages.

Maybe I'm missing something, but how is #2 and #3 supposed to work with
DSA? The switch driver doesn't know whether the user wants to run BC or
TC. For #2 the STP state is ignored, for #3 it is not except for peer
delay measurements.

Thanks,
Kurt