Re: [PATCH net-next] net: phy: micrel: Add config_init for LAN8814

The 11/26/2021 16:15, Andrew Lunn wrote:

Hi Andrew,

quoted

- swap the MDI-X A,B transmit so that there will not be any link flip-flaps
  when the PHY gets a link.

Isn't this a board issue, rather than generic? Or does the datasheet
have the pins labelled wrongly and all boards following the datasheet
are wrong?

From my understanding it is not a board issue. This is needed in case
the link partners can't do the A/B swapping based on MDI/MDIX. It would
not harm if this is set also for link partners that can do this.

        Andrew

-- 
/Horatiu