Thread (8 messages) flat view 8 messages, 3 authors, 2021-11-26
STALE1721d

Revision v1 of 2 in this series.

Revisions (2)
  1. v1 current
  2. v2 [diff vs current]

[PATCH net-next 1/4] net: mvneta: Use struct tc_mqprio_qopt_offload for MQPrio configuration

From: Maxime Chevallier <maxime.chevallier@bootlin.com>
Date: 2021-11-25 15:50:06
Also in: lkml
Subsystem: marvell mvneta ethernet driver, networking drivers, the rest · Maintainers: Marcin Wojtas, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

The struct tc_mqprio_qopt_offload is a container for struct tc_mqprio_qopt,
that allows passing extra parameters, such as traffic shaping. This commit
converts the current mqprio code to that new struct.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
 drivers/net/ethernet/marvell/mvneta.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 80e4b500695e..46b7604805f7 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -38,6 +38,7 @@
 #include <net/ipv6.h>
 #include <net/tso.h>
 #include <net/page_pool.h>
+#include <net/pkt_cls.h>
 #include <linux/bpf_trace.h>
 
 /* Registers */
@@ -4908,14 +4909,14 @@ static void mvneta_setup_rx_prio_map(struct mvneta_port *pp)
 }
 
 static int mvneta_setup_mqprio(struct net_device *dev,
-			       struct tc_mqprio_qopt *qopt)
+			       struct tc_mqprio_qopt_offload *mqprio)
 {
 	struct mvneta_port *pp = netdev_priv(dev);
 	u8 num_tc;
 	int i;
 
-	qopt->hw = TC_MQPRIO_HW_OFFLOAD_TCS;
-	num_tc = qopt->num_tc;
+	mqprio->qopt.hw = TC_MQPRIO_HW_OFFLOAD_TCS;
+	num_tc = mqprio->qopt.num_tc;
 
 	if (num_tc > rxq_number)
 		return -EINVAL;
@@ -4926,13 +4927,15 @@ static int mvneta_setup_mqprio(struct net_device *dev,
 		return 0;
 	}
 
-	memcpy(pp->prio_tc_map, qopt->prio_tc_map, sizeof(pp->prio_tc_map));
+	memcpy(pp->prio_tc_map, mqprio->qopt.prio_tc_map,
+	       sizeof(pp->prio_tc_map));
 
 	mvneta_setup_rx_prio_map(pp);
 
-	netdev_set_num_tc(dev, qopt->num_tc);
-	for (i = 0; i < qopt->num_tc; i++)
-		netdev_set_tc_queue(dev, i, qopt->count[i], qopt->offset[i]);
+	netdev_set_num_tc(dev, mqprio->qopt.num_tc);
+	for (i = 0; i < mqprio->qopt.num_tc; i++)
+		netdev_set_tc_queue(dev, i, mqprio->qopt.count[i],
+				    mqprio->qopt.offset[i]);
 
 	return 0;
 }
-- 
2.25.4
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help