[net-next PATCH v2 3/9] net: dsa: qca8k: remove extra mutex_init in qca8k_setup
flat view
STALE1804d
SUPERSEDED
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: 2021-11-22 01:04:28
Also in:
lkml
Subsystem:
networking drivers, networking [dsa], the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds
Status: Superseded by v3 (posted 2021-11-22). [go to v3]
Revision v2 (3 revisions archived).
Revisions (3)
- v1
- v2 current [diff against previous]
- v3 [diff against previous]
Mutex is already init in sw_probe. Remove the extra init in qca8k_setup. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> --- drivers/net/dsa/qca8k.c | 2 -- 1 file changed, 2 deletions(-)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 6783a3c2620f..321d11dfcc2c 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c@@ -1086,8 +1086,6 @@ qca8k_setup(struct dsa_switch *ds) if (ret) return ret; - mutex_init(&priv->reg_mutex); - /* Start by setting up the register mapping */ priv->regmap = devm_regmap_init(ds->dev, NULL, priv, &qca8k_regmap_config);
--
2.32.0