Hi Vladimir,
-----Original Message-----
From: Vladimir Oltean <olteanv@gmail.com>
Sent: 2021年11月11日 23:16
To: Joakim Zhang <redacted>
Cc: <redacted>; alexandre.torgue@foss.st.com;
joabreu@synopsys.com; davem@davemloft.net; kuba@kernel.org;
dl-linux-imx [off-list ref]; netdev@vger.kernel.org;
linux-kernel@vger.kernel.org
Subject: Re: [PATCH net] net: stmmac: fix system hang caused by
eee_ctrl_timer during suspend/resume
Hi Joakim,
On Wed, Sep 08, 2021 at 03:43:35PM +0800, Joakim Zhang wrote:
quoted
commit 5f58591323bf ("net: stmmac: delete the eee_ctrl_timer after
napi disabled"), this patch tries to fix system hang caused by
eee_ctrl_timer, unfortunately, it only can resolve it for system
reboot stress test. System hang also can be reproduced easily during
system suspend/resume stess test when mount NFS on i.MX8MP EVK
board.
quoted
In stmmac driver, eee feature is combined to phylink framework. When
do system suspend, phylink_stop() would queue delayed work, it invokes
stmmac_mac_link_down(), where to deactivate eee_ctrl_timer
synchronizly.
quoted
In above commit, try to fix issue by deactivating eee_ctrl_timer
obviously, but it is not enough. Looking into eee_ctrl_timer expire
callback stmmac_eee_ctrl_timer(), it could enable hareware eee mode
again. What is unexpected is that LPI interrupt
(MAC_Interrupt_Enable.LPIEN bit) is always asserted. This interrupt
has chance to be issued when LPI state entry/exit from the MAC, and at
that time, clock could have been already disabled.
quoted
The result is that system hang when driver try to touch register from
interrupt handler.
The reason why above commit can fix system hang issue in
stmmac_release() is that, deactivate eee_ctrl_timer not just after
napi disabled, further after irq freed.
In conclusion, hardware would generate LPI interrupt when clock has
been disabled during suspend or resume, since hardware is in eee mode
and LPI interrupt enabled.
Interrupts from MAC, MTL and DMA level are enabled and never been
disabled when system suspend, so postpone clocks management from
suspend stage to noirq suspend stage should be more safe.
Fixes: 5f58591323bf ("net: stmmac: delete the eee_ctrl_timer after
napi disabled")
Signed-off-by: Joakim Zhang <redacted>
---
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 14 ------
.../ethernet/stmicro/stmmac/stmmac_platform.c | 44
+++++++++++++++++++
quoted
2 files changed, 44 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index ece02b35a6ce..246f84fedbc8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7118,7 +7118,6 @@ int stmmac_suspend(struct device *dev)
struct net_device *ndev = dev_get_drvdata(dev);
struct stmmac_priv *priv = netdev_priv(ndev);
u32 chan;
- int ret;
if (!ndev || !netif_running(ndev))
return 0;
@@ -7150,13 +7149,6 @@ int stmmac_suspend(struct device *dev)
} else {
stmmac_mac_set(priv, priv->ioaddr, false);
pinctrl_pm_select_sleep_state(priv->device);
- /* Disable clock in case of PWM is off */
- clk_disable_unprepare(priv->plat->clk_ptp_ref);
This patch looks strange to me. You are basically saying that the LPI timer for
MAC-level EEE is clocked from the clk_ptp_ref clock?! Are you sure this is
correct? I thought this clock is only used for the PTP timestamping counter.
Maybe the clock definitions in imx8mp.dtsi are not correct?
No, MAC-level EEE is not clocked from the clk_ptp_ref clock, this clock is for PTP. To fix this issue,
I can only move pm_runtime_force_suspend() into noirq suspend stage. As commit message said,
"postpone clocks management from suspend stage to noirq suspend stage", that means I move all
the clocks management into noirq suspend stage, including PTP clock, it's should be harmless for PTP
function. Do you find any regression with this patch?
Best Regards,
Joakim Zhang
quoted
- ret = pm_runtime_force_suspend(dev);
- if (ret) {
- mutex_unlock(&priv->lock);
- return ret;
- }
}
mutex_unlock(&priv->lock);@@ -7242,12 +7234,6 @@ int stmmac_resume(struct device *dev)
priv->irq_wake = 0;
} else {
pinctrl_pm_select_default_state(priv->device);
- /* enable the clk previously disabled */
- ret = pm_runtime_force_resume(dev);
- if (ret)
- return ret;
- if (priv->plat->clk_ptp_ref)
- clk_prepare_enable(priv->plat->clk_ptp_ref);
/* reset the phy so that it's ready */
if (priv->mii)
stmmac_mdio_reset(priv->mii);diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 5ca710844cc1..4885f9ad1b1e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
**********************************************************
************
quoted
*********/
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/of.h>
@@ -771,9 +772,52 @@ static int __maybe_unused
stmmac_runtime_resume(struct device *dev)
quoted
return stmmac_bus_clks_config(priv, true); }
+static int stmmac_pltfr_noirq_suspend(struct device *dev) {
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ int ret;
+
+ if (!netif_running(ndev))
+ return 0;
+
+ if (!device_may_wakeup(priv->device) || !priv->plat->pmt) {
+ /* Disable clock in case of PWM is off */
+ clk_disable_unprepare(priv->plat->clk_ptp_ref);
+
+ ret = pm_runtime_force_suspend(dev);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int stmmac_pltfr_noirq_resume(struct device *dev) {
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ int ret;
+
+ if (!netif_running(ndev))
+ return 0;
+
+ if (!device_may_wakeup(priv->device) || !priv->plat->pmt) {
+ /* enable the clk previously disabled */
+ ret = pm_runtime_force_resume(dev);
+ if (ret)
+ return ret;
+
+ clk_prepare_enable(priv->plat->clk_ptp_ref);
+ }
+
+ return 0;
+}
+
const struct dev_pm_ops stmmac_pltfr_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_suspend,
stmmac_pltfr_resume)
quoted
SET_RUNTIME_PM_OPS(stmmac_runtime_suspend,
stmmac_runtime_resume,
quoted
NULL)
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_noirq_suspend,
+stmmac_pltfr_noirq_resume)
};
EXPORT_SYMBOL_GPL(stmmac_pltfr_pm_ops);
--
2.17.1