[RFC PATCH v4 8/8] dt-bindings: net: dsa: qca8k: add LEDs definition example
flat view
STALE1797d
SUPERSEDED
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: 2021-11-11 01:35:40
Also in:
linux-devicetree, linux-doc, linux-leds, lkml
Subsystem:
networking drivers, networking [dsa], open firmware and flattened device tree bindings, qualcomm atheros qca8k dsa switch driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Christian Marangi, Linus Torvalds
Revision v4 of 6 in this series.
Revisions (6)
Add LEDs definition example for qca8k using the offload trigger as the default trigger and add all the supported offload triggers by the switch. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> --- .../devicetree/bindings/net/dsa/qca8k.yaml | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index 48de0ace265d..106d95adc1e8 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml@@ -64,6 +64,8 @@ properties: internal mdio access is used. With the legacy mapping the reg corresponding to the internal mdio is the switch reg with an offset of -1. + Each phy have at least 3 LEDs connected and can be declared + using the standard LEDs structure. properties: '#address-cells':
@@ -340,6 +342,24 @@ examples: internal_phy_port1: ethernet-phy@0 { reg = <0>; + + leds { + led@0 { + reg = <0>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + linux,default-trigger = "offload-phy-activity"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + linux,default-trigger = "offload-phy-activity"; + }; + }; }; internal_phy_port2: ethernet-phy@1 {
--
2.32.0