[PATCH net] net: ethernet: lantiq_etop: Fix compilation error
From: Aleksander Jan Bajkowski <hidden>
Date: 2021-11-09 22:33:57
Also in:
lkml
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
This fixes the error detected when compiling the driver.
Fixes: 14d4e308e0aa ("net: lantiq: configure the burst length in ethernet drivers")
Reported-by: kernel test robot <redacted>
Signed-off-by: Aleksander Jan Bajkowski <redacted>
---
drivers/net/ethernet/lantiq_etop.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
index 2258e3f19161..6433c909c6b2 100644
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c@@ -262,7 +262,7 @@ ltq_etop_hw_init(struct net_device *dev) /* enable crc generation */ ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG); - ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, rx_burst_len); + ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, priv->rx_burst_len); for (i = 0; i < MAX_DMA_CHAN; i++) { int irq = LTQ_DMA_CH0_INT + i;
--
2.30.2