[PATCH v3 2/2] wcn36xx: fix RX BD rate mapping for 5GHz legacy rates
From: Benjamin Li <hidden>
Date: 2021-11-04 01:06:12
Also in:
linux-arm-msm, linux-wireless, lkml
Subsystem:
atheros ath generic utilities, qualcomm wcn36xx wireless driver, the rest · Maintainers:
Jeff Johnson, Loic Poulain, Linus Torvalds
The linear mapping between the BD rate field and the driver's 5GHz
legacy rates table (wcn_5ghz_rates) does not only apply for the latter
four rates -- it applies to all eight rates.
Fixes: 6ea131acea98 ("wcn36xx: Fix warning due to bad rate_idx")
Signed-off-by: Benjamin Li <redacted>
---
drivers/net/wireless/ath/wcn36xx/txrx.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c
index f0a9f069a92a9..dd58dde8c8363 100644
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c@@ -272,7 +272,6 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb) const struct wcn36xx_rate *rate; struct ieee80211_hdr *hdr; struct wcn36xx_rx_bd *bd; - struct ieee80211_supported_band *sband; u16 fc, sn; /*
@@ -350,12 +349,11 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb) status.enc_flags = rate->encoding_flags; status.bw = rate->bw; status.rate_idx = rate->mcs_or_legacy_index; - sband = wcn->hw->wiphy->bands[status.band]; status.nss = 1; if (status.band == NL80211_BAND_5GHZ && status.encoding == RX_ENC_LEGACY && - status.rate_idx >= sband->n_bitrates) { + status.rate_idx >= 4) { /* no dsss rates in 5Ghz rates table */ status.rate_idx -= 4; }
--
2.25.1