[PATCH net-next 01/15] amd: lance: use eth_hw_addr_set()
From: Jakub Kicinski <kuba@kernel.org>
Date: 2021-11-19 07:10:44
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
IO reads, so save to an array then eth_hw_addr_set(). Fixes build on x86 (32bit). Signed-off-by: Jakub Kicinski <kuba@kernel.org> --- drivers/net/ethernet/amd/lance.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/amd/lance.c b/drivers/net/ethernet/amd/lance.c
index 945bf1d87507..462016666752 100644
--- a/drivers/net/ethernet/amd/lance.c
+++ b/drivers/net/ethernet/amd/lance.c@@ -480,6 +480,7 @@ static int __init lance_probe1(struct net_device *dev, int ioaddr, int irq, int unsigned long flags; int err = -ENOMEM; void __iomem *bios; + u8 addr[ETH_ALEN]; /* First we look for special cases. Check for HP's on-board ethernet by looking for 'HP' in the BIOS.
@@ -541,7 +542,8 @@ static int __init lance_probe1(struct net_device *dev, int ioaddr, int irq, int /* There is a 16 byte station address PROM at the base address. The first six bytes are the station address. */ for (i = 0; i < 6; i++) - dev->dev_addr[i] = inb(ioaddr + i); + addr[i] = inb(ioaddr + i); + eth_hw_addr_set(dev, addr); printk("%pM", dev->dev_addr); dev->base_addr = ioaddr;
--
2.31.1