[PATCH net-next 1/3] net: dpaa2-mac: populate supported_interfaces member
From: Russell King <hidden>
Date: 2021-11-17 17:24:06
Subsystem:
dpaa2 ethernet driver, networking drivers, the rest · Maintainers:
Ioana Ciornei, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Populate the phy interface mode bitmap for the Freescale DPAA2 driver with interfaces modes supported by the MAC. Signed-off-by: Russell King <redacted> --- .../net/ethernet/freescale/dpaa2/dpaa2-mac.c | 21 +++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
index ef8f0a055024..176ce0a03716 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c@@ -336,9 +336,30 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac) return err; } + memset(&mac->phylink_config, 0, sizeof(mac->phylink_config)); mac->phylink_config.dev = &net_dev->dev; mac->phylink_config.type = PHYLINK_NETDEV; + /* We support the current interface mode, and if we have a PCS + * similar interface modes that do not require the PLLs to be + * reconfigured. + */ + __set_bit(mac->if_mode, mac->phylink_config.supported_interfaces); + if (mac->pcs) { + switch (mac->if_mode) { + case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_SGMII: + __set_bit(PHY_INTERFACE_MODE_1000BASEX, + mac->phylink_config.supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_SGMII, + mac->phylink_config.supported_interfaces); + break; + + default: + break; + } + } + phylink = phylink_create(&mac->phylink_config, dpmac_node, mac->if_mode, &dpaa2_mac_phylink_ops);
--
2.30.2