[PATCH net] net: dsa: mv88e6xxx: Don't support >1G speeds on 6191X on ports other than 10
From: Marek Behún <kabel@kernel.org>
Date: 2021-11-04 17:17:59
Subsystem:
marvell 88e6xxx ethernet switch fabric driver, networking drivers, networking [dsa], the rest · Maintainers:
Andrew Lunn, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Linus Torvalds
Model 88E6191X only supports >1G speeds on port 10. Port 0 and 9 are
only 1G.
Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: Russell King (Oracle) <redacted>
---
drivers/net/dsa/mv88e6xxx/chip.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 14c678a9e41b..f00cbf5753b9 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c@@ -640,7 +640,10 @@ static void mv88e6393x_phylink_validate(struct mv88e6xxx_chip *chip, int port, unsigned long *mask, struct phylink_link_state *state) { - if (port == 0 || port == 9 || port == 10) { + bool is_6191x = + chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6191X; + + if (((port == 0 || port == 9) && !is_6191x) || port == 10) { phylink_set(mask, 10000baseT_Full); phylink_set(mask, 10000baseKR_Full); phylink_set(mask, 10000baseCR_Full);
--
2.32.0